Sobre o curso
Every lesson in the CompTIA Linux+ XK0-006 series from Morse Group Institute of Technology, in order, from the exam overview through all five domains. The full course, with a textbook, narrated lectures, hands-on labs, and practice quizzes, is at https://mgit.io
Aulas do Curso (135 vídeos)
Descrição da aula 0: How the Linux+ Exam Works | CompTIA Linux+ XK0-006 (Exam Overview)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Start here. This lesson explains how the CompTIA Linux+ XK0-006 exam works: what the certification validates, the format and passing score, how the five domains are weighted, and what performance-based questions (PBQs) look like. It also sets out a study plan built on a two-machine lab and explains how the lessons in this playlist are organized. Chapters 0:00 Introduction 0:28 What Linux+ certifies 0:59 Exam format 1:26 The five domains 2:00 Performance-based questions 2:29 How to study 2:57 How this series works 3:29 Practice question 4:05 Answer and recap 4:37 Keep learning What this lesson covers - What Linux+ validates, and the recommended 12 months of hands-on Linux server experience - Exam format: a maximum of 90 questions in 90 minutes, passing score 720 on a 100 to 900 scale - The five domains and their weights (System Management 23%, Troubleshooting 22%, Services and User Management 20%, Security 18%, Automation, Orchestration, and Scripting 17%) - Performance-based questions and how to prepare for them - A study plan: two virtual machines, a snapshot before each lab, study in dependency order, and troubleshooting by subsystem Covered in depth in Module 01 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ITCertification
Descrição da aula 1: Linux Distributions and Server Architectures: RPM vs dpkg | CompTIA Linux+ XK0-006 (Objective 1.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Linux distributions and server architectures are part of CompTIA Linux+ XK0-006 objective 1.1, which covers basic Linux concepts. This lesson explains what a distribution provides, how RPM-based and dpkg-based families differ, and which architectures a server can use: x86, x86_64/AMD64, AArch64, and RISC-V. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 What a distribution provides 1:03 RPM and dpkg 1:35 Distribution families and support 2:06 Instruction set architectures 2:36 The four named architectures 3:13 Identifying a system 3:48 Practice question 4:30 Answer and recap 5:00 Keep learning What this lesson covers - What a distribution provides: kernel, userspace, packages, repositories, defaults, and lifecycle - RPM-based and dpkg-based distributions and their low-level and high-level tools - The Red Hat, SUSE, and Debian families and their support lifecycles - Instruction set architectures, compiled code, scripts, and the exec format error - x86, x86_64/AMD64, AArch64, and RISC-V, and the names each tool uses for them - Identifying a system with /etc/os-release and uname -m Covered in depth in Module 01 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxDistributions
Descrição da aula 2: Open Source, Free, Proprietary, and Copyleft Licensing | CompTIA Linux+ XK0-006 (Objective 1.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Software licensing is part of CompTIA Linux+ XK0-006 objective 1.1, which covers basic Linux concepts. This lesson explains how copyright and licenses relate, then defines open source software, free software, proprietary software, and copyleft. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 License and copyright 0:57 Proprietary software 1:29 Free software 2:04 Open source software 2:34 Copyleft and the GPL 3:10 License categories at a glance 3:40 Practice question 4:18 Answer and recap 4:49 Keep learning What this lesson covers - Copyright, licenses, and why price is a separate question - Proprietary software, end-user license agreements, and the kernel taint flag - Free software and the four freedoms of the Free Software Foundation - Open source software and the Open Source Definition from the Open Source Initiative - Copyleft, the GNU General Public License, and distribution as the trigger - Strong copyleft, weak copyleft, and permissive licenses compared Covered in depth in Module 01 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SoftwareLicensing
Descrição da aula 3: Linux GUI: Display Managers, Window Managers, X, Wayland | CompTIA Linux+ XK0-006 (Objective 1.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The Linux graphical environment is part of CompTIA Linux+ XK0-006 objective 1.1, which covers basic Linux concepts, including the graphical user interface (GUI) components: display managers, window managers, the X server, and Wayland. This lesson places each component in the graphical stack and compares X11 sessions with Wayland sessions. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 A session is built from layers 1:00 The X server 1:34 Wayland 2:07 Display managers 2:41 Window managers 3:11 X11 and Wayland at a glance 3:39 Practice question 4:06 Answer and recap 4:38 Keep learning What this lesson covers - The layers of a graphical session: display server, window manager, display manager, and desktop environment - The X server: Xorg, the X11 client and server model, the DISPLAY variable, and the lack of isolation between clients - Wayland: the compositor as display server and window manager, application isolation, and Xwayland - Display managers: GDM, SDDM, LightDM, graphical.target, and multi-user.target - Window managers: stacking, tiling, and compositing styles - X11 and Wayland compared side by side Covered in depth in Module 01 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Wayland
Descrição da aula 4: Linux Filesystem Hierarchy Standard (FHS) Explained | CompTIA Linux+ XK0-006 (Objective 1.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The Filesystem Hierarchy Standard is part of CompTIA Linux+ XK0-006 objective 1.1, which covers basic Linux concepts, including the top-level directories /, /bin, /boot, /dev, /etc, /home, /lib, /proc, /sbin, /tmp, /usr, and /var. This lesson explains what belongs in each directory and how the standard separates static data from variable data. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Why a standard layout exists 1:00 Root, boot, and home 1:31 Configuration, devices, and processes 2:05 Programs and libraries 2:37 Variable and temporary data 3:07 Placing files on the exam 3:39 Practice question 4:15 Answer and recap 4:46 Keep learning What this lesson covers - Why a standard layout exists: static and variable files, shareable and unshareable files - The root directory, /boot, and /home, and how / differs from /root - Configuration in /etc, device files in /dev, and the /proc virtual filesystem - Programs and libraries in /usr, /bin, /sbin, and /lib, and the /usr merge - Variable and temporary data in /var and /tmp - Matching common files to the directory that holds them Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #FHS
Descrição da aula 5: The Linux Boot Process and Network Boot with PXE | CompTIA Linux+ XK0-006 (Objective 1.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The Linux boot process and network boot are part of CompTIA Linux+ XK0-006 objective 1.1, which covers the bootloader, the kernel, the initial RAM disk (initrd), and the Preboot Execution Environment (PXE). This lesson follows a server through the six stages of a boot, compares legacy BIOS with UEFI, and explains how PXE uses DHCP, TFTP, and HTTP to boot and install a machine over the network. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Six stages of a boot 0:54 Legacy BIOS and UEFI 1:22 Bootloader, kernel, and initrd 1:53 What PXE is 2:21 DHCP, the address and boot file 2:58 TFTP, HTTP, and security 3:28 Practice question 4:04 Answer and recap 4:35 Keep learning What this lesson covers - The six boot stages: POST, firmware boot manager, GRUB2, kernel, initrd, and systemd - Legacy BIOS and the MBR compared with UEFI, the ESP, and NVRAM boot entries - What the bootloader, the kernel, and the initrd each do, and how switch_root starts systemd - What PXE requires of the client and of the boot order - DHCP options 60 and 93, next-server, and the boot file name - TFTP, HTTP installation with Kickstart, and securing the provisioning network Covered in depth in Module 09 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #PXEBoot
Descrição da aula 6: GRUB2 Configuration Files and Kernel Parameters | CompTIA Linux+ XK0-006 (Objective 1.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The GRUB2 bootloader and kernel parameters are part of CompTIA Linux+ XK0-006 objective 1.1, which covers basic Linux concepts, including bootloader configuration files and kernel parameters. This lesson separates the files an administrator edits from the generated grub.cfg, compares RHEL 9 with Ubuntu, and explains which program reads each kernel parameter. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 One generated file 0:54 The configuration files 1:27 Regenerating grub.cfg 1:57 BLS entries and grubby 2:31 Kernel parameters 3:03 Changing parameters for one boot 3:30 Practice question 4:10 Answer and recap 4:41 Keep learning What this lesson covers - Where grub.cfg lives on RHEL 9 and Ubuntu, and the stub on the EFI system partition - The configuration files: /etc/default/grub and the scripts in /etc/grub.d/ - Regenerating grub.cfg with grub2-mkconfig and update-grub - What a kernel install does: update-grub on Ubuntu, a Boot Loader Specification entry on RHEL 9 - Changing kernel parameters on RHEL 9 with grubby - How the kernel, the initrd, and systemd read parameters, and how to change them for one boot Covered in depth in Module 09 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #GRUB2
Descrição da aula 7: Linux Kernel and initrd: dracut and mkinitrd | CompTIA Linux+ XK0-006 (Objectives 1.1 and 1.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The kernel and the initial RAM disk are part of CompTIA Linux+ XK0-006 objective 1.1, which covers the basic boot process, and objective 1.2, which covers initrd management with dracut and mkinitrd. This lesson explains running and installed kernels, why the kernel needs an initrd to reach its root filesystem, and how the image is built and inspected. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Running and installed kernels 0:53 The kernel image 1:22 initrd and initramfs 1:54 What the initramfs does at boot 2:24 dracut and mkinitrd 2:56 RHEL and Ubuntu compared 3:37 Practice question 4:21 Answer and recap 4:48 Keep learning What this lesson covers - The running kernel and installed kernels: uname -r and installonly_limit - What the kernel image holds, and why a root filesystem driver can be out of reach at boot - initrd and initramfs: how the two formats differ and why both names remain in use - The initramfs boot sequence, host-only and generic images, and the emergency shell - Building and inspecting images with dracut, lsinitrd, and the older mkinitrd - The Debian and Ubuntu equivalents: update-initramfs and lsinitramfs Covered in depth in Module 09 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxKernel
Descrição da aula 8: Kernel Modules: lsmod, modprobe, insmod, rmmod, depmod | CompTIA Linux+ XK0-006 (Objective 1.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Kernel modules are part of CompTIA Linux+ XK0-006 objective 1.2, which covers Linux device management concepts and tools, including lsmod, modinfo, modprobe, insmod, rmmod, and depmod. This lesson explains how modules load automatically, what each tool does, and how an administrator keeps a module from loading. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 What a module is 0:59 lsmod and modinfo 1:30 modprobe 1:59 insmod and rmmod 2:26 depmod 2:55 Keeping a module from loading 3:25 Practice question 4:09 Answer and recap 4:36 Keep learning What this lesson covers - What a loadable kernel module is and where module files are stored - How udev and modalias strings load modules automatically - Inspecting modules with lsmod and modinfo - Loading and removing modules with modprobe, and how it handles dependencies - The low-level tools insmod and rmmod, and rebuilding the indexes with depmod - Blocking modules with blacklist and install lines in /etc/modprobe.d/ Covered in depth in Module 09 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #KernelModules
Descrição da aula 9: Hardware Discovery Part 1: dmesg, dmidecode, lscpu, lsmem | CompTIA Linux+ XK0-006 (Objective 1.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Hardware discovery with dmesg, dmidecode, lscpu, and lsmem is part of CompTIA Linux+ XK0-006 objective 1.2, which covers Linux device management concepts and tools. This lesson explains which source each tool reads, what the tool can report from that source, and when it needs root privileges. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Each tool reads one source 0:55 dmesg and the ring buffer 1:23 Access and earlier boots 1:53 dmidecode and SMBIOS 2:25 lscpu 2:57 lsmem and memory slots 3:35 Practice question 4:09 Answer and recap 4:45 Keep learning What this lesson covers - Where dmesg, dmidecode, lscpu, and lsmem get their information - The kernel ring buffer and the dmesg options -T, -l err,warn, and -w - The Ubuntu dmesg restriction and reading earlier boots with journalctl -k -b -1 - Reading the SMBIOS firmware tables with dmidecode -s and dmidecode -t - Sockets, cores, threads, and NUMA nodes in lscpu - Memory blocks in lsmem and physical memory slots in dmidecode -t memory Covered in depth in Module 09 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #HardwareDiscovery
Descrição da aula 10: Hardware Discovery: lspci, lshw, ipmitool, and nvtop | CompTIA Linux+ XK0-006 (Objective 1.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Bus listing tools, hardware monitoring, and custom hardware are part of CompTIA Linux+ XK0-006 objective 1.2, which covers Linux device management concepts and tools. This lesson explains lspci, lsusb, lshw, the lm_sensors package, and ipmitool, then covers embedded systems, GPU use cases, and the nvtop monitor. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 lspci 0:58 lsusb and lshw 1:27 lm_sensors 1:57 The BMC and ipmitool 2:34 Embedded systems 3:01 GPU use cases and nvtop 3:34 Practice question 4:13 Answer and recap 4:42 Keep learning What this lesson covers - Listing PCI devices with lspci and finding the bound driver with lspci -k - Listing USB devices with lsusb and building one hardware report with lshw - Reading temperatures, fans, and voltages with the lm_sensors package - The baseboard management controller and in-band and out-of-band access with ipmitool - What makes a system embedded: system on a chip, U-Boot, and the device tree - GPU use cases, NVIDIA kernel modules, and monitoring with nvtop Covered in depth in Module 09 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #HardwareDiscovery
Descrição da aula 11: Block Devices and Partition Tables: lsblk, blkid, MBR, GPT | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Block devices and partition tables are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including the lsblk and blkid commands. This lesson explains how Linux names storage devices, how lsblk and blkid identify them, and how the MBR and GPT partition table formats differ. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Block devices and device files 0:52 Device names and stable links 1:25 Listing devices with lsblk 1:56 Reading signatures with blkid 2:27 The MBR partition table 2:57 The GUID Partition Table 3:26 Practice question 4:13 Answer and recap 4:42 Keep learning What this lesson covers - Block devices, character devices, and major and minor numbers in /dev - How sd, vd, and NVMe names decode, and the stable links under /dev/disk - Reading the lsblk device tree, its columns, and its common options - Reading UUID, PARTUUID, and PTTYPE signatures with sudo blkid - The MBR layout, its 2 TiB limit, and primary, extended, and logical partitions - GPT, its protective MBR and backup copy, and when to choose it Covered in depth in Module 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #PartitionTables
Descrição da aula 12: Partitioning Tools: fdisk, gdisk, parted, growpart | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Partitioning tools are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including fdisk, gdisk, parted, and growpart. This lesson explains when each tool writes to the disk, how each one is used, and how an existing partition grows into new space. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:24 When each tool writes 0:49 fdisk 1:21 gdisk and sgdisk 1:50 parted 2:19 Alignment and the kernel 2:49 growpart 3:21 Practice question 4:07 Answer and recap 4:35 Keep learning What this lesson covers - When fdisk, gdisk, parted, sgdisk, and growpart write changes to the disk - The fdisk single-letter commands and the sfdisk table dump - GPT detail in gdisk, MBR to GPT conversion, and scripting with sgdisk - Scripted partitioning with parted, its units, and resizepart - Partition alignment and updating the kernel with partprobe or partx - Growing a partition with growpart, then growing its filesystem Covered in depth in Module 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Partitioning
Descrição da aula 13: Filesystem Formats: ext4, XFS, Btrfs, tmpfs, and mkfs | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Filesystem formats and the mkfs command are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including the xfs, ext4, btrfs, and tmpfs formats. This lesson compares the on-disk formats, explains how tmpfs differs, and shows what each mkfs command does. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Four formats 0:56 ext4 1:27 XFS 1:58 Btrfs 2:27 tmpfs 3:00 Creating filesystems with mkfs 3:32 Practice question 4:10 Answer and recap 4:42 Keep learning What this lesson covers - Default filesystem formats by distribution and how a journal protects metadata - ext4 extents, size limits, the root reserve, and resizing - XFS allocation groups, dynamic inodes, and why it cannot shrink - Btrfs copy-on-write, checksums, subvolumes, and snapshots - tmpfs storage in memory and its size limit - Creating filesystems with mkfs and how each command treats an existing signature Covered in depth in Module 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #FilesystemFormats
Descrição da aula 14: Inodes and Capacity: df, du, and Inode Counts | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Inodes and capacity reporting are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including the df and du utilities and inodes. This lesson explains what an inode records, how df and du measure blocks and inodes, and how an administrator diagnoses inode exhaustion. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 What an inode records 0:56 Blocks and inodes 1:24 The df command 1:55 The du command 2:27 When df and du disagree 2:55 Inode exhaustion 3:26 Practice question 4:22 Answer and recap 4:52 Keep learning What this lesson covers - What an inode records and how directories map names to inode numbers - Blocks and inodes as two separate budgets on one filesystem - Reading filesystem totals with df -h, df -hT, and df -i - Locating usage by directory with du and its --inodes option - Why du can report less than df, including deleted files still held open - Diagnosing inode exhaustion when "No space left on device" appears with free space Covered in depth in Modules 04 and 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Inodes
Descrição da aula 15: Mounting Filesystems: mount, umount, fstab, /proc/mounts | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Mounting filesystems is part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including mount, umount, /etc/fstab, /etc/mtab, and /proc/mounts. This lesson explains what mounting does, how to mount and unmount by hand, how to write and test an /etc/fstab line, and where the kernel records current mounts. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 What mounting does 0:55 Mounting by hand 1:22 Unmounting and busy targets 1:51 The six fields of /etc/fstab 2:23 Testing an /etc/fstab edit 2:55 /proc/mounts and /etc/mtab 3:23 Practice question 4:14 Answer and recap 4:41 Keep learning What this lesson covers - How mounting attaches a filesystem to a mount point in the directory tree - Mounting by hand with mount and confirming the result with findmnt - Unmounting with umount and resolving a target is busy error with fuser and lsof - The six fields of an /etc/fstab line and why a UUID is the preferred source - Testing an edit with findmnt --verify, systemctl daemon-reload, and mount -a - The difference between /etc/fstab, /proc/mounts, and /etc/mtab Covered in depth in Module 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #fstab
Descrição da aula 16: Mount Options: noexec, nosuid, noatime, nofail, autofs | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Mount options and autofs are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including noatime, nodiratime, nodev, noexec, nosuid, nofail, ro, rw, remount, and autofs. This lesson explains what each option changes, how remount applies options to a mounted filesystem, and how autofs mounts filesystems on demand. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 What defaults stands for 1:00 Access-time options 1:30 nodev, nosuid, and noexec 2:06 ro, rw, and remount 2:38 nofail and the boot 3:06 Mounting on demand with autofs 3:43 Practice question 4:22 Answer and recap 4:49 Keep learning What this lesson covers - What the defaults option stands for and how later options override earlier ones - Reducing access-time writes with relatime, noatime, and nodiratime - What nodev, nosuid, and noexec block, and the limit of noexec - Using ro, rw, and remount to change a mounted filesystem in place - How nofail lets the boot continue when a device is missing - How autofs uses the master map and map files to mount on first access Covered in depth in Module 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #MountOptions
Descrição da aula 17: Check and Resize Filesystems: fsck, xfs_repair, xfs_growfs | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Checking and resizing filesystems is part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including fsck, xfs_repair, resize2fs, xfs_growfs, and fio. This lesson explains how to check and repair ext4 and XFS filesystems, the order of operations for growing and shrinking, and how fio measures storage performance. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Why structure gets damaged 0:59 fsck and e2fsck 1:30 XFS and xfs_repair 2:05 Resize order 2:33 resize2fs and xfs_growfs 3:08 Measuring with fio 3:36 Practice question 4:26 Answer and recap 4:58 Keep learning What this lesson covers - Why filesystem metadata becomes inconsistent and why repairs require an unmounted filesystem - The fsck front end, the e2fsck options -n, -p, -y, -f, and -b, and fsck exit status - Why XFS uses xfs_repair, and when xfs_repair -L is a last resort - The rule that a filesystem must never be larger than its container - Growing and shrinking with resize2fs and growing with xfs_growfs - Measuring IOPS, bandwidth, and latency with fio Covered in depth in Module 11 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #fsck
Descrição da aula 18: LVM Physical Volumes and Volume Groups: pvcreate, vgcreate | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Logical Volume Manager physical volumes and volume groups are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including the pv and vg command families. This lesson explains the three LVM layers, how extents are allocated, how physical volumes and volume groups are created and examined, and how a disk is retired or a group moved between servers. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 The three LVM layers 0:53 Extents 1:24 Physical volume commands 1:52 Volume group commands 2:22 Growing a group and retiring a disk 2:49 Activation, export, import, and removal 3:21 Practice question 4:11 Answer and recap 4:38 Keep learning What this lesson covers - The three LVM layers and the limits of a plain partition - Physical extents, the default extent size, and volumes that span disks - Labeling and reporting with pvcreate, pvs, pvdisplay, and pvscan - Building and examining groups with vgcreate, vgs, vgdisplay, and vgscan - Growing a group with vgextend and pvresize, and retiring a disk with pvmove, vgreduce, and pvremove - Activating, moving, and deleting a group with vgchange, vgexport, vgimport, and vgremove Covered in depth in Module 12 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LVM
Descrição da aula 19: LVM Logical Volumes: lvcreate, lvextend, lvresize, lvs | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Logical volumes are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including lvcreate, lvdisplay, lvs, lvextend, lvresize, lvchange, and lvremove. This lesson follows a logical volume from creation through growth, shrinking, and removal, along with the filesystem steps that accompany each change. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 Creating a logical volume 0:59 Reporting with lvs and lvdisplay 1:29 Growing with lvextend and lvresize 1:57 Growing the filesystem with -r 2:25 Shrinking a volume safely 2:55 lvchange and lvremove 3:23 Practice question 4:18 Answer and recap 4:45 Keep learning What this lesson covers - Creating a logical volume with lvcreate, using -L for a size and -l for extents or percentages - Reading lvs output, including the Attr string, and the full record from lvdisplay - The difference between lvextend and lvresize, and how a leading plus sign changes the size - Growing the volume and filesystem together with lvextend -r - Why the filesystem must shrink first, and why XFS cannot be shrunk - Changing activation and permissions with lvchange and deleting a volume with lvremove Covered in depth in Module 12 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LVM
Descrição da aula 20: Software RAID: mdadm, /proc/mdstat, and RAID Levels | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Software RAID is part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including mdadm and /proc/mdstat. This lesson compares the RAID levels, builds an array with mdadm, reads its health from /proc/mdstat, and replaces a failed member. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 RAID levels compared 0:55 Hardware and software RAID 1:21 Creating an array with mdadm 1:48 Reading /proc/mdstat 2:12 mdadm detail and persistence 2:42 Replacing a failed member 3:11 Practice question 4:13 Answer and recap 4:42 Keep learning What this lesson covers - RAID 0, 1, 5, 6, and 10: minimum disks, usable capacity, and failures survived - Hardware RAID, software RAID with the md driver, and RAID under LVM - Creating an array with mdadm --create, --level, --raid-devices, and --spare-devices - Reading the status fields in /proc/mdstat, including [3/2], [U_U], and the (F) flag - Using mdadm --detail, --examine, and --detail --scan, then persisting the array in mdadm.conf - Replacing a failed member with --fail, --remove, and --add Covered in depth in Module 12 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SoftwareRAID
Descrição da aula 21: Network Mounts: NFS Exports and SMB Shares with Samba | CompTIA Linux+ XK0-006 (Objective 1.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Network mounts are part of CompTIA Linux+ XK0-006 objective 1.3, which covers managing storage in a Linux system, including the Network File System (NFS) and Server Message Block (SMB) with Samba. This lesson explains how a server publishes a directory with each protocol, how a Linux client mounts it, and how the two ends agree on file ownership. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:24 NFS and SMB compared 0:51 Publishing NFS exports 1:27 NFS identity and root squashing 1:57 Mounting an NFS export 2:27 Samba shares in smb.conf 2:59 Mounting an SMB share 3:36 Practice question 4:19 Answer and recap 4:48 Keep learning What this lesson covers - How NFS and SMB differ, and why the Linux SMB client is still named cifs - Publishing NFS exports in /etc/exports and applying them with exportfs -rav - NFS identity with sec=sys, matching UIDs across hosts, and root squashing - Mounting an export with mount -t nfs and the _netdev and nofail options in /etc/fstab - Defining Samba shares in smb.conf, with smbpasswd and testparm - Mounting a share with mount -t cifs and a root-only credentials file Covered in depth in Module 12 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #NFS
Descrição da aula 22: TCP/IP and the ip Command: address, link, route, hostname | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io TCP/IP on a Linux host is part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including ip address, ip link, ip route, and hostname. This lesson explains the four TCP/IP layers on a host, IPv4 prefixes and IPv6 addressing, and how to read and change interface, address, and route state. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 TCP/IP layers on a host 0:57 Addresses, prefixes, and subnets 1:25 Reading ip address 1:54 ip link and interface names 2:24 ip route and the gateway 2:52 hostname and runtime changes 3:21 Practice question 4:01 Answer and recap 4:31 Keep learning What this lesson covers - The four TCP/IP layers on a Linux host and the identifier each one uses - IPv4 prefix lengths, netmasks, network and broadcast addresses, and IPv6 basics - Reading ip address output and adding or removing an address at runtime - Predictable interface names, the UP and LOWER_UP flags, and ip link set - Reading ip route, the default gateway, longest-prefix matching, and ip route get - The hostname command, hostnamectl, and why ip changes are lost at reboot Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxNetworking
Descrição da aula 23: Name Resolution: /etc/hosts, resolv.conf, nsswitch.conf | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Name resolution files are part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including /etc/hosts, /etc/resolv.conf, and /etc/nsswitch.conf. This lesson follows a name lookup through the C library and the Name Service Switch, explains what each file controls, and shows which service writes /etc/resolv.conf on current distributions. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 How a program resolves a name 0:51 The nsswitch.conf hosts line 1:18 The /etc/hosts file 1:50 The resolv.conf keywords 2:21 Who writes resolv.conf 2:54 Testing with getent and dig 3:21 Practice question 4:02 Answer and recap 4:30 Keep learning What this lesson covers - How a program resolves a name through the C library and the Name Service Switch - The hosts line of /etc/nsswitch.conf and the order of its sources - The format of /etc/hosts, its typical uses, and the risk of a forgotten entry - The nameserver, search, domain, and options keywords in /etc/resolv.conf - How NetworkManager on RHEL and the systemd-resolved stub on Ubuntu manage /etc/resolv.conf - Why getent hosts and dig can return different answers for the same name Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #DNS
Descrição da aula 24: NetworkManager: Connection Profiles with nmcli | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io NetworkManager is part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including nmcli. This lesson explains devices and connection profiles, the keyfile format, and how to change, apply, and create profiles with nmcli. It also covers nmtui and nm-connection-editor and closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 The NetworkManager daemon 0:56 Devices and connection profiles 1:27 The keyfile format 2:04 nmcli connection modify 2:35 Applying and adding profiles 3:03 nmtui and nm-connection-editor 3:35 Practice question 4:17 Answer and recap 4:45 Keep learning What this lesson covers - The NetworkManager daemon and the move to keyfiles on RHEL 9 - The difference between a device and a connection profile - The .nmconnection keyfile format, its location, and nmcli connection reload - Replacing, appending, and removing properties with nmcli connection modify - Applying a change with nmcli connection up or nmcli device reapply - Creating and removing profiles, plus nmtui and nm-connection-editor Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #NetworkManager
Descrição da aula 25: Netplan: /etc/netplan, netplan try, apply, and status | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Netplan is part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including /etc/netplan, netplan apply, netplan try, and netplan status. This lesson explains how Netplan turns YAML files into renderer configuration, how those files are written and read, and how a change is applied safely on a remote server. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Netplan and its renderers 0:58 Files in /etc/netplan 1:34 YAML keys and syntax 2:06 netplan generate and netplan apply 2:35 Testing with netplan try 3:05 Reading netplan status 3:36 Practice question 4:18 Answer and recap 4:44 Keep learning What this lesson covers - Netplan as a configuration translator and its two renderers, systemd-networkd and NetworkManager - How files in /etc/netplan are named, ordered, and protected - Common YAML keys and the indentation rules that cause most errors - Validating with netplan generate and applying with netplan apply - The netplan try countdown, its timeout, and what a revert does and does not restore - Reading interface, route, and DNS state with netplan status Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Netplan
Descrição da aula 26: Connectivity Tools: ping, traceroute, tracepath, mtr, arp | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Connectivity and path testing is part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including ping and ping6, traceroute, tracepath, mtr, and arp. This lesson explains what each tool proves, how path tools use the TTL field, and how to read loss at each hop. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 ping and what a reply proves 0:56 ping6 and the MTU test 1:27 traceroute and the TTL field 1:57 Reading a trace and tracepath 2:30 mtr statistics over time 2:57 arp and the neighbor cache 3:26 Practice question 4:04 Answer and recap 4:30 Keep learning What this lesson covers - What a ping reply proves and what a missing reply does not prove - ping6, ping -6, and the zone index for link-local IPv6 destinations - Testing path MTU limits with a do-not-fragment ping - How traceroute and tracepath find each hop with increasing TTL values - Reading mtr statistics to separate rate limiting from real packet loss - The arp command, the IPv4 cache, and the net-tools package Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxNetworking
Descrição da aula 27: DNS and Socket Tools: dig, nslookup, ss, nc, and curl | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io DNS and socket troubleshooting is part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including dig, nslookup, ss, nc, and curl. This lesson explains how a DNS query is answered, how to read dig and nslookup results, how to list listening sockets with ss, and how to test a port and an application. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:24 DNS queries and records 0:51 Querying with dig 1:16 nslookup compared with dig 1:45 Listing sockets with ss 2:19 Reading the bound address 2:48 nc and curl 3:16 Practice question 4:01 Answer and recap 4:29 Keep learning What this lesson covers - Recursive resolvers, caching, TTL, and the common DNS record types - Reading dig status codes and using +short, -x, @server, and +trace - How nslookup compares with dig, and what a non-authoritative answer means - Listing listening ports and their processes with ss -tulpn - How the bound address of a listener decides who can connect - Testing a port with nc and an application with curl Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #DNSTools
Descrição da aula 28: Traffic Analysis Tools: tcpdump, nmap, iperf3, ethtool | CompTIA Linux+ XK0-006 (Objective 1.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Traffic analysis and performance testing are part of CompTIA Linux+ XK0-006 objective 1.4, which covers managing network services and configurations on a Linux server, including tcpdump, nmap, iperf3, and ethtool. This lesson explains how to capture and read packets, how to interpret port states from a scan, how to measure throughput, and how to check negotiated link settings. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Protocol analyzers and captures 1:00 Capturing with tcpdump 1:31 Reading TCP flags 2:00 Scanning ports with nmap 2:27 Measuring throughput with iperf3 2:57 Link settings with ethtool 3:24 Practice question 4:05 Answer and recap 4:35 Keep learning What this lesson covers - Protocol analyzers, pcap files, and the tcpdump to Wireshark workflow - Common tcpdump options and capture filters - Reading TCP flags and where the capture point sits relative to the firewall - Open, closed, and filtered ports in nmap, and the authorization a scan requires - Measuring throughput with iperf3 in server and client modes - Checking speed, duplex, drivers, and counters with ethtool Covered in depth in Module 13 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #TrafficAnalysis
Descrição da aula 29: Shells, Command Syntax, and Absolute and Relative Paths | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Working in the shell is part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including absolute and relative paths, echo, and uname. This lesson explains which shell is running, how a command line is built, how exit status works, and how absolute paths, relative paths, and the special names dot, dot dot, tilde, and hyphen locate files. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:24 Shells on Linux 0:55 Parts of a command line 1:25 Command types, echo, and uname 1:54 Exit status 2:24 Absolute and relative paths 2:57 Special names and cd 3:27 Practice question 4:09 Answer and recap 4:36 Keep learning What this lesson covers - The sh, bash, dash, and zsh shells, and what /bin/sh points to on each distribution family - Commands, short and long options, arguments, and quoting - The order in which the shell resolves a name, and using type, echo, and uname - Exit status values and the &&, ||, and ; connectors - Absolute and relative paths and the working directory - The special names ., .., ~, and cd - Covered in depth in Module 02 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ShellBasics
Descrição da aula 30: Environment Variables and Startup Files: PATH, .bashrc | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Environment variables and shell startup files are part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including common environmental variables and the .bashrc, .bash_profile, and .profile files. This lesson explains how export passes a variable to child processes, what PATH and PS1 control, and which files Bash reads at startup. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Shell and environment variables 0:54 Common environment variables 1:23 The PATH search 1:54 The PS1 prompt 2:22 Login and interactive shells 2:56 Which file holds each setting 3:32 Practice question 4:20 Answer and recap 4:48 Keep learning What this lesson covers - Shell variables, environment variables, and the export command - HOME, USER, SHELL, and DISPLAY, and listing variables with env, printenv, and set - How PATH is searched and how to append or prepend a directory - Building the prompt with PS1 sequences - Login shells, interactive shells, and the files each one reads - Where settings belong in .bashrc, .bash_profile, and .profile, and applying changes with source Covered in depth in Module 02 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashStartupFiles
Descrição da aula 31: History, Aliases, and Expansion: !!, alias, and Globs | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Shell history, aliases, and expansion are part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including the !, !!, alias, and history utilities. This lesson explains the order in which Bash rewrites a command line, how to recall and reuse earlier commands, how aliases work, and how globs and braces expand before a command runs. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 How Bash rewrites a line 0:59 The history list 1:34 Reusing commands with ! and !! 2:02 Aliases 2:31 Globbing 3:02 Braces and tab completion 3:34 Practice question 4:16 Answer and recap 4:49 Keep learning What this lesson covers - The order in which Bash rewrites a command line - The history list, Ctrl+R, HISTSIZE, HISTFILESIZE, and HISTCONTROL - Reusing commands with !!, !n, !string, !$, and !* - Defining, removing, and bypassing aliases with alias, unalias, and a backslash - Globbing with *, ?, and square brackets, and the rules for hidden files - Brace expansion, previewing with echo, and Tab completion Covered in depth in Module 02 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ShellHistory
Descrição da aula 32: Text Editors: vi, Vim, nano, and Safe Config Edits | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The vi, Vim, and nano text editors are part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including text editors. This lesson explains Vim's modes, how to save, quit, edit, search, and recover a session, how nano's shortcuts work, and a safe routine for changing configuration files. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Vim modes 0:58 Saving and quitting 1:30 Moving, changing, and copying text 2:03 Search, replace, and swap files 2:34 The nano editor 3:03 A safe editing routine 3:36 Practice question 4:14 Answer and recap 4:44 Keep learning What this lesson covers - Normal, insert, command-line, and visual modes in vi and Vim - Saving and quitting with :w, :wq, :x, ZZ, :q, and :q! - Moving, deleting, changing, yanking, and putting text in normal mode - Searching, replacing with :%s/old/new/g, and recovering from a swap file - nano shortcuts for writing, exiting, searching, replacing, cutting, and pasting - A safe configuration edit with cp -p, sudoedit, a service test, and diff -u Covered in depth in Module 02 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #TextEditors
Descrição da aula 33: Standard Streams, Redirection, and Here Documents | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Standard streams, redirection, here documents, and here strings are part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including channel redirection. This lesson explains the three file descriptors, how the shell sends output and errors to files, why the order of redirections matters, and how here documents and here strings supply input from inside a script. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 The three standard streams 0:58 Output and input redirection 1:26 Standard error and combining streams 1:57 Discarding output and sudo 2:35 Here documents 3:05 Indented forms and here strings 3:34 Practice question 4:24 Answer and recap 4:55 Keep learning What this lesson covers - Standard input, standard output, standard error, and file descriptors 0, 1, and 2 - Truncating, appending, and reading files with the redirection operators - Redirecting standard error and combining both streams in the correct order - Discarding output with /dev/null and the limit of sudo with redirection - Here documents, delimiters, terminators, and quoted versus unquoted delimiters - Indented here documents, writing files, and here strings Covered in depth in Module 03 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Redirection
Descrição da aula 34: Pipes, tee, and xargs: Chaining Linux Commands | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Pipes, tee, and xargs are part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including channel redirection and the tee and xargs utilities. This lesson explains how a pipe connects commands, how standard error and exit status behave in a pipeline, how tee saves a copy of a stream, and how xargs builds command lines from input. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 How a pipe works 0:50 Standard error and pipes 1:18 Pipeline exit status 1:49 Saving a copy with tee 2:18 Building arguments with xargs 2:47 xargs options and file names 3:20 Practice question 4:02 Answer and recap 4:31 Keep learning What this lesson covers - How the pipe operator connects standard output to standard input through a kernel buffer - Sending standard error into a pipe with 2>&1 and |& - Pipeline exit status, PIPESTATUS, and set -o pipefail - Saving a copy of a stream with tee, tee -a, and sudo tee - Turning input items into arguments with xargs and its -n, -I, -r, and -P options - Handling file names with spaces using find -print0 and xargs -0 Covered in depth in Module 03 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxPipes
Descrição da aula 35: Reading and Slicing Text: less, tail, cut, sort, and uniq | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Reading and slicing text is part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including the cat, less, more, head, tail, wc, cut, tr, sort, and uniq utilities. This lesson explains how to measure a file, read all or part of it, follow a log as it grows, and reduce its lines to a ranked count. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Measuring a file with wc 0:58 Printing files with cat 1:27 Paging with less and more 1:52 head, tail, and following a log 2:20 Slicing with cut and tr 2:48 Ordering and counting with sort and uniq 3:27 Practice question 4:22 Answer and recap 4:53 Keep learning What this lesson covers - Measuring files and pipeline output with wc - Printing and joining files with cat, and revealing hidden characters with cat -A - Paging and searching with less and more - Reading the ends of a file with head and tail, and following logs with tail -f and tail -F - Slicing fields and characters with cut, and changing characters with tr - Ordering with sort and counting with uniq, including sort | uniq -c | sort -rn Covered in depth in Module 03 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #TextProcessing
Descrição da aula 36: grep and Regular Expressions: Searching Text in Linux | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Searching text with grep is part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including the grep utility. This lesson explains how grep selects lines, which options change its output, and how regular expressions describe a match. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 How grep works 0:53 Common grep options 1:25 Regular expression metacharacters 1:59 Anchors 2:25 Basic and extended expressions 3:02 Regular expressions and wildcards 3:31 Practice question 4:23 Answer and recap 4:55 Keep learning What this lesson covers - How grep reads files and standard input, and what its exit status reports - The common options, including -i, -v, -r, -c, -n, -o, -w, -l, and the context options - Metacharacters, bracket expressions, repetition, and escaping - Anchors for the start and end of a line and for word boundaries - Basic and extended regular expressions, and the deprecated egrep and fgrep names - How regular expressions differ from shell wildcards Covered in depth in Module 03 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #grep
Descrição da aula 37: sed and awk: Stream Editing on Linux | CompTIA Linux+ XK0-006 (Objective 1.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Stream editing with sed and awk is part of CompTIA Linux+ XK0-006 objective 1.5, which covers managing a Linux system using common shell operations, including the sed and awk utilities. This lesson explains how sed processes each line, how addresses and the substitute command work, how to edit a file in place with a backup, and how awk works with fields to print, count, and total data. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 How sed processes lines 0:49 sed addresses and commands 1:16 The substitute command 1:50 Editing files in place 2:17 How awk uses fields 2:46 Calculating with awk 3:15 Practice question 4:02 Answer and recap 4:32 Keep learning What this lesson covers - How sed reads each line into the pattern space, and what the -n option changes - Line numbers, ranges, regular expressions, and inverted addresses - The substitute command, its g, number, p, and I flags, and the & and \1 references - Safe in-place edits with sed -i.bak, diff, and a configuration check - The awk pattern and action rule, fields, NF, NR, and the -F option - Counting, totaling, and grouping with awk variables, END blocks, and associative arrays Covered in depth in Module 03 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #StreamEditing
Descrição da aula 38: Archiving and Compression: tar, cpio, gzip, xz, 7-Zip | CompTIA Linux+ XK0-006 (Objective 1.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Archiving and compression are part of CompTIA Linux+ XK0-006 objective 1.6, which covers backup and restore operations for a Linux server, including the archiving tools tar and cpio and the compression tools gzip, bzip2, xz, unzip, and 7-Zip. This lesson explains how archivers and compressors divide the work, how to create, list, and extract archives with tar and cpio, and how the compressors compare. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 Archivers and compressors 0:59 tar modes 1:29 tar filters and metadata 2:03 Archiving with cpio 2:40 gzip, bzip2, and xz 3:11 unzip and 7-Zip 3:46 Practice question 4:24 Answer and recap 4:55 Keep learning What this lesson covers - The difference between an archiver and a compressor - Creating, listing, and extracting archives with tar, and restoring a single member - tar compression filters, leading slash handling, and what extraction preserves - The copy-out, copy-in, and pass-through modes of cpio - Comparing gzip, bzip2, and xz by suffix, options, speed, and ratio - Listing, testing, and extracting archives with unzip and 7z Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #TarCommand
Descrição da aula 39: Linux Backup and Restore: dd, ddrescue, rsync, and zcat | CompTIA Linux+ XK0-006 (Objective 1.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Backup and restore tools are part of CompTIA Linux+ XK0-006 objective 1.6, which covers performing backup and restore operations for a Linux server. This lesson explains how rsync keeps directory trees current, how dd images healthy devices, how ddrescue recovers data from failing devices, and how zcat, zless, and zgrep read compressed files in place. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 How rsync transfers files 0:55 rsync options for backups 1:30 Snapshots and restore tests 1:59 Imaging devices with dd 2:31 Rescuing disks with ddrescue 3:03 Reading compressed files 3:31 Practice question 4:13 Answer and recap 4:43 Keep learning What this lesson covers - How rsync transfers only what differs, and what a trailing slash on the source means - The rsync options -a, -H, -A, -X, --delete, and -n - Dated snapshots with --link-dest, and the purpose of a restore test - Imaging and restoring a device with dd and its if=, of=, bs=, status=, and conv= settings - Rescuing a failing disk with ddrescue, a mapfile, and two passes - Reading compressed files with zcat, zless, and zgrep Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxBackup
Descrição da aula 40: KVM and QEMU: VirtIO, Nested VMs, and Bare Metal vs VMs | CompTIA Linux+ XK0-006 (Objective 1.7)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io KVM and QEMU are part of CompTIA Linux+ XK0-006 objective 1.7, which covers virtualization on Linux systems, including Linux hypervisors, paravirtualized drivers, VirtIO, nested virtualization, and bare metal versus virtual machines. This lesson explains how KVM and QEMU divide the work of running a guest, how an administrator checks a host for support, and why the virtual device type affects throughput. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Hypervisors and Linux 0:58 KVM and host checks 1:36 QEMU device model 2:07 Emulated and VirtIO devices 2:37 Bare metal or virtual machine 3:06 Nested virtualization 3:40 Practice question 4:21 Answer and recap 4:53 Keep learning What this lesson covers - Type 1 and type 2 hypervisors, and where KVM places Linux - The vmx and svm flags, the KVM modules, and /dev/kvm - How QEMU supplies virtual hardware with and without KVM - Emulated devices, VirtIO paravirtualized drivers, and passthrough - When to choose bare metal over a virtual machine - The two conditions for nested virtualization Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #KVM
Descrição da aula 41: Managing VMs with libvirt, virsh, and virt-manager | CompTIA Linux+ XK0-006 (Objective 1.7)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Managing virtual machines is part of CompTIA Linux+ XK0-006 objective 1.7, which covers virtualization on Linux systems, including virtual machine tools, VM states, and VM resources. This lesson explains how libvirt, virsh, and virt-manager work together, how a guest moves between states, and how an administrator changes its processors, memory, storage, and network interfaces. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 The libvirt layer 0:56 Connections and virsh 1:32 virt-manager and virt-install 2:01 VM states 2:36 CPU and RAM 3:07 Storage and network 3:38 Practice question 4:15 Answer and recap 4:49 Keep learning What this lesson covers - The libvirt management layer, guest definitions, and its daemons - Connection addresses and the virsh command-line client - The virt-manager graphical client and virt-install - VM states and the difference between shutdown, destroy, and undefine - Changing CPU and RAM with --config and --live - Attaching storage and network interfaces, and overcommitment Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Virsh
Descrição da aula 42: VM Disk Images, Clones, Snapshots, and Migrations | CompTIA Linux+ XK0-006 (Objective 1.7)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Virtual machine disk images, baseline templates, cloning, snapshots, and migrations are part of CompTIA Linux+ XK0-006 objective 1.7, which covers virtualization on Linux systems. This lesson explains how to read, convert, and resize images with qemu-img, how to build guests from a generalized template, and how snapshots and live migration work with virsh. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 Disk image formats and properties 0:58 Converting and resizing images 1:33 Baseline image templates 2:04 Linked overlays and full clones 2:36 Snapshots 3:07 Migrations 3:40 Practice question 4:19 Answer and recap 4:48 Keep learning What this lesson covers - Disk image formats and reading image properties with qemu-img info - Converting and resizing images, and growing the disk inside the guest - Building a baseline image template with virt-sysprep - Linked qcow2 overlays compared with full clones made by virt-clone - Creating, reverting, and deleting snapshots, and why a snapshot is not a backup - Live and offline migration and the requirements for a live migration Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #VirtualMachines
Descrição da aula 43: VM Network Types: Bridged, NAT, Host-Only, Routed, Open | CompTIA Linux+ XK0-006 (Objective 1.7)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Virtual machine network types are part of CompTIA Linux+ XK0-006 objective 1.7, which covers virtualization on Linux systems, including bridged, network address translation, host-only or isolated, routed, and open networks. This lesson explains how libvirt builds each virtual network and which connections each type allows. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 How libvirt builds a network 0:56 NAT networks 1:27 Bridged networking 1:55 Host-only and isolated networks 2:23 Routed and open networks 2:52 Choosing a network type 3:21 Practice question 3:59 Answer and recap 4:27 Keep learning What this lesson covers - How libvirt builds a network from a Linux bridge, tap devices, dnsmasq, and firewall rules - NAT networks and the default virbr0 network - Bridged networking through a host bridge and its limits - The difference between host-only and isolated networks - Routed and open networks and their firewall and routing needs - Choosing a network type and checking a guest with virsh domiflist and domifaddr Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #VirtualNetworking
Descrição da aula 44: Create, Copy, Move, Remove Files: ls, mkdir, cp, mv, rm | CompTIA Linux+ XK0-006 (Objective 2.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Creating, copying, moving, and removing files and directories is part of CompTIA Linux+ XK0-006 objective 2.1, which covers managing files and directories on a Linux system with utilities such as ls, mkdir, touch, cp, mv, rm, and rmdir. This lesson explains what each command does and the options and destination rules that change its result. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 Listing files with ls 1:03 Creating with mkdir and touch 1:32 The cp destination rule 2:01 Preserving attributes with cp 2:33 Moving and renaming with mv 3:02 Removing with rm and rmdir 3:31 Practice question 4:15 Answer and recap 4:46 Keep learning What this lesson covers - Listing files with ls and reading the long format - Creating directories with mkdir -p and -m, and files and timestamps with touch - The cp destination rule and copying a directory's contents with source/. - Preserving mode, ownership, and timestamps with cp -p and cp -a - How mv renames within a filesystem and copies then deletes across filesystems - Removing with rm and rmdir, and the precautions that prevent accidents Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxCommands
Descrição da aula 45: Inspect and Find Files: stat, diff, find, locate, lsof | CompTIA Linux+ XK0-006 (Objective 2.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Inspecting, comparing, and finding files is part of CompTIA Linux+ XK0-006 objective 2.1, which covers managing files and directories on a Linux system, including the utilities stat, file, diff, sdiff, find, locate, and lsof. This lesson explains how to identify a file's content and metadata, compare two versions of a file, search by name, owner, size, and age, and find the process that holds a file open. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 file and stat 0:55 diff and sdiff 1:25 find tests 1:58 find actions 2:25 locate and updatedb 2:53 Open files with lsof 3:26 Practice question 4:03 Answer and recap 4:34 Keep learning What this lesson covers - Identifying content with file and reading inode metadata and timestamps with stat - Comparing files with diff, the unified format, and diff exit status - Side-by-side comparison and interactive merging with sdiff - find tests for name, type, owner, size, permissions, and age, and the -delete and -exec actions - How locate depends on the database that updatedb builds - Using lsof to find busy files and deleted files that still use space Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #FindCommand
Descrição da aula 46: Hard Links and Symbolic Links: ln, ln -s, Dangling Links | CompTIA Linux+ XK0-006 (Objective 2.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Hard links and symbolic links are part of CompTIA Linux+ XK0-006 objective 2.1, which covers managing files and directories on a Linux system, including the ln utility and both kinds of link. This lesson explains how a file name points to an inode, how a hard link and a symbolic link differ, and what happens to each when the original name is removed. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Names, inodes, and link counts 0:51 Hard links 1:17 Symbolic links 1:46 Removed targets and relative paths 2:11 Inspecting and finding links 2:41 Working with links 3:13 Practice question 3:52 Answer and recap 4:21 Keep learning What this lesson covers - How directory entries, inodes, and the link count relate - Creating a hard link with ln, and the two restrictions on hard links - Creating a symbolic link with ln -s, and how the kernel follows it - Dangling links and how relative link targets are resolved - Inspecting and finding links with ls, readlink, stat, and find - Replacing a symbolic link to a directory with ln -sfn Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SymbolicLinks
Descrição da aula 47: Device Files in /dev: Block, Character, Special Devices | CompTIA Linux+ XK0-006 (Objective 2.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The device types in /dev are part of CompTIA Linux+ XK0-006 objective 2.1, which covers managing files and directories on a Linux system, including block devices, character devices, and special character devices. This lesson explains what a device file is, how major and minor numbers connect it to a kernel driver, and how the three device types differ. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 What a device file is 0:57 Major and minor numbers 1:25 Block devices 1:53 Character devices 2:22 Special character devices 2:52 How /dev is populated 3:22 Practice question 4:08 Answer and recap 4:36 Keep learning What this lesson covers - What a device file stores and how a long listing shows its type - Major and minor numbers and the /proc/devices file - Block devices: disks, partitions, and their naming - Character devices: terminals, serial ports, and kernel interfaces - The special character devices /dev/null, /dev/zero, /dev/urandom, and /dev/full - How devtmpfs and udev fill /dev, and what mknod does Covered in depth in Module 04 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #DeviceFiles
Descrição da aula 48: UID, GID, EUID and /etc/passwd, /etc/shadow, /etc/group | CompTIA Linux+ XK0-006 (Objective 2.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Linux identity and the account files are part of CompTIA Linux+ XK0-006 objective 2.2, which covers local account management in a Linux environment, including the UID, GID, EUID, and EGID attributes and the files /etc/passwd, /etc/shadow, and /etc/group. This lesson explains how the kernel identifies accounts by number, how real and effective identifiers differ, how user, system, and service accounts are separated by UID range, and what each field of the account files holds. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 UID and GID 0:53 EUID and EGID 1:25 User, system, and service accounts 1:54 /etc/passwd 2:21 /etc/shadow 2:52 /etc/group 3:21 Practice question 3:58 Answer and recap 4:25 Keep learning What this lesson covers - The UID and GID, why root is UID 0, and primary and supplementary groups - Real and effective identifiers, and how the SUID and SGID bits set the EUID and EGID - User, system, and service accounts, and the UID ranges set in /etc/login.defs - The seven fields of /etc/passwd - The nine fields of /etc/shadow, the password hash, and the values that refuse a password login - The four fields of /etc/group, /etc/gshadow, and listing accounts with getent passwd Covered in depth in Module 05 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxUsers
Descrição da aula 49: Create and Delete Users: useradd, adduser, userdel | CompTIA Linux+ XK0-006 (Objective 2.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Creating and deleting accounts is part of CompTIA Linux+ XK0-006 objective 2.2, which covers local account management in a Linux environment, including useradd, adduser, userdel, deluser, and the /etc/skel profile template. This lesson explains where useradd reads its defaults, which options override them, how system accounts differ, and what each delete command removes and leaves behind. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 useradd defaults 1:03 useradd options 1:33 System and service accounts 2:01 /etc/skel and /etc/profile 2:31 adduser on Debian and Ubuntu 2:57 userdel and deluser 3:24 Practice question 4:03 Answer and recap 4:36 Keep learning What this lesson covers - Where useradd reads its defaults: /etc/login.defs and /etc/default/useradd - useradd options for the home directory, shell, comment, UID, and groups - Creating system and service accounts with useradd -r and a nologin shell - How /etc/skel seeds a new home directory, and where /etc/profile fits - How adduser on Debian and Ubuntu differs from useradd - Removing accounts with userdel and deluser, and what each leaves in place Covered in depth in Module 05 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #UserAdd
Descrição da aula 50: Modify Users and Groups: usermod, chsh, groupadd, groupmod | CompTIA Linux+ XK0-006 (Objective 2.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Modifying accounts and managing groups is part of CompTIA Linux+ XK0-006 objective 2.2, which covers local account management in a Linux environment, including the commands usermod, chsh, groupadd, groupmod, and groupdel. This lesson explains how to change the fields of an existing account, add a user to a group without removing existing memberships, change a login shell, and create, rename, renumber, and delete groups. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 The usermod command 0:59 Supplementary and primary groups 1:30 Renaming an account 1:57 Changing a shell with chsh 2:25 Creating groups with groupadd 2:56 groupmod and groupdel 3:25 Practice question 3:59 Answer and recap 4:31 Keep learning What this lesson covers - Changing the comment, shell, home directory, and UID of an account with usermod - The difference between usermod -G, usermod -aG, and usermod -g - Renaming a login with usermod -l and why group changes take effect at the next login - Changing a login shell with chsh and the role of /etc/shells - Creating groups with groupadd, including a chosen GID and system groups - Renaming and renumbering with groupmod, and when groupdel refuses to delete a group Covered in depth in Module 05 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #usermod
Descrição da aula 51: Password Aging and Locking: chage, passwd, usermod | CompTIA Linux+ XK0-006 (Objective 2.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Password aging and account locking are part of CompTIA Linux+ XK0-006 objective 2.2, which covers local account management in a Linux environment, including locking accounts with chage, passwd, and usermod and setting expiration with chage and configuration files. This lesson explains how to read and set password aging, where new accounts get their defaults, how account expiration differs from password aging, and what a password lock does and does not stop. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 Reading aging with chage -l 0:57 Setting aging with chage 1:28 Defaults in /etc/login.defs 2:02 Account expiration 2:29 Locking a password 2:59 A complete lock 3:27 Practice question 4:06 Answer and recap 4:38 Keep learning What this lesson covers - Reading an account's aging rules with chage -l - Setting the minimum, maximum, warning, and inactive periods with chage, and forcing a change at next login - Aging defaults for new accounts in /etc/login.defs and /etc/default/useradd - Account expiration dates with chage -E, usermod -e, and useradd -e - Locking and unlocking a password with passwd -l and usermod -L, and checking status with passwd -S - Why a password lock does not stop SSH key logins, and what a complete lock adds Covered in depth in Module 05 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #PasswordAging
Descrição da aula 52: Who Is Logged In: id, getent, who, w, last, lastlog | CompTIA Linux+ XK0-006 (Objective 2.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Listing accounts, identities, and login sessions is part of CompTIA Linux+ XK0-006 objective 2.2, which covers local account management in a Linux environment, including the listing commands getent passwd, groups, id, last, lastlog, w, who, and whoami. This lesson explains which commands report the identity of a process, which read the account databases, and which read the session records that login programs write. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 id and whoami 1:01 groups and getent 1:33 The session record files 2:01 who and w 2:30 last and lastb 2:58 lastlog 3:24 Practice question 3:58 Answer and recap 4:32 Keep learning What this lesson covers - Reading the UID, GID, and groups of a user with id, and the effective user with whoami - Checking memberships with groups, and listing accounts and groups with getent passwd and getent group - The session record files /run/utmp, /var/log/wtmp, /var/log/btmp, and /var/log/lastlog - Listing current sessions with who and w, including idle time and the current command - Reading login history with last and failed logins with lastb - Finding unused accounts with lastlog -b Covered in depth in Module 05 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #lastlog
Descrição da aula 53: Linux Processes: PID, PPID, /proc, and Process States | CompTIA Linux+ XK0-006 (Objective 2.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Processes and process states are part of CompTIA Linux+ XK0-006 objective 2.3, which covers managing processes and jobs in a Linux environment, including the process ID, the parent process ID, /proc/<PID>, and the running, sleeping, blocked, stopped, and zombie states. This lesson explains how the kernel numbers processes, how to read a process record from /proc, and what each state code in ps means. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 The process ID 0:56 Parent processes and the PPID 1:23 Reading /proc/<PID> 1:56 Running and sleeping 2:25 The blocked state 2:52 Stopped and zombie 3:22 Practice question 3:57 Answer and recap 4:28 Keep learning What this lesson covers - The difference between a program and a process, and how the kernel assigns and reuses PIDs - The PPID, orphaned processes, and what a PPID of 1 means - The status, cmdline, exe, cwd, and fd entries under /proc/<PID> - The running (R) and sleeping (S) states - The blocked state (D) and why it raises the load average - The stopped (T) and zombie (Z) states, and how zombies are removed Covered in depth in Module 08 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxProcesses
Descrição da aula 54: Observing Processes: ps, top, htop, atop, mpstat, strace | CompTIA Linux+ XK0-006 (Objective 2.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Observing processes is part of CompTIA Linux+ XK0-006 objective 2.3, which covers managing processes and jobs in a Linux environment, including the process verification tools ps, top, htop, atop, mpstat, pidstat, pstree, and strace. This lesson explains which question each tool answers, from a snapshot of the process table to live views, measurements over an interval, and the system calls of one process. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Snapshots with ps 0:56 Reading ps aux columns 1:24 Live view with top 1:54 htop and atop 2:22 mpstat and pidstat 2:54 pstree and strace 3:25 Practice question 4:03 Answer and recap 4:34 Keep learning What this lesson covers - Taking a snapshot with ps -ef and ps aux, and selecting by user or PID - Reading the ps aux columns, including why %CPU is a lifetime average and RSS is the better memory measure - Watching live activity with top, and its sort keys - What htop adds to top, and how atop records history for later review - Measuring per core with mpstat -P ALL and per process with pidstat - Drawing ancestry with pstree and printing system calls with strace Covered in depth in Module 08 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxProcesses
Descrição da aula 55: Signals and Job Control: kill, pkill, bg, fg, jobs, nohup | CompTIA Linux+ XK0-006 (Objective 2.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Signals and job control are part of CompTIA Linux+ XK0-006 objective 2.3, which covers managing processes and jobs in a Linux environment, including kill, killall, pkill, bg, fg, jobs, nohup, exec, and the signals 1 HUP, 9 KILL, and 15 TERM. This lesson explains what each of the three signals does, how to send a signal by PID or by name, how to move a job between the foreground and the background, and how to keep a command running after the session ends. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 SIGTERM, SIGKILL, and SIGHUP 0:56 The kill command 1:24 killall and pkill 1:54 Background jobs, bg, and fg 2:22 Ctrl+C, Ctrl+Z, and Ctrl+D 2:51 nohup and exec 3:15 Practice question 3:51 Answer and recap 4:21 Keep learning What this lesson covers - The signals 15 TERM, 9 KILL, and 1 HUP, and why SIGTERM is sent before SIGKILL - Sending signals to a PID with kill, by number or by name - Signaling by name with killall and pkill, and previewing a match with pgrep - Starting background jobs with &, listing them with jobs, and resuming them with bg and fg - What Ctrl+C, Ctrl+Z, and Ctrl+D do to the foreground job - Protecting a command from a hangup with nohup, and what the exec builtin does Covered in depth in Module 08 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #JobControl
Descrição da aula 56: Process Priority and Limits: nice, renice, ulimit | CompTIA Linux+ XK0-006 (Objective 2.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Process priority and process limits are part of CompTIA Linux+ XK0-006 objective 2.3, which covers managing processes and jobs in a Linux environment, including priority with nice and renice, and process limits. This lesson explains the nice scale, how to start a command with nice and change a running process with renice, and how soft and hard limits are set with ulimit and /etc/security/limits.conf. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Nice values and the PR column 0:56 Priority under contention 1:24 The nice command 1:47 The renice command 2:12 Soft and hard limits with ulimit 2:41 Persistent limits in limits.conf 3:18 Practice question 4:04 Answer and recap 4:32 Keep learning What this lesson covers - The nice scale from -20 to 19, the default of 0, and the NI and PR columns in ps and top - Why nice values matter only when processes compete for the processor - Starting a command at an adjusted value with nice, and who may lower a nice value - Changing a running process with renice by PID, user, or process group - Soft and hard process limits, and viewing and setting them with ulimit - Persistent limits in /etc/security/limits.conf, applied at login by pam_limits Covered in depth in Module 08 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ProcessPriority
Descrição da aula 57: Scheduling Tasks: crontab, at, and anacron | CompTIA Linux+ XK0-006 (Objective 2.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Scheduling tasks is part of CompTIA Linux+ XK0-006 objective 2.3, which covers managing processes and jobs in a Linux environment, including the scheduling tools crontab, at, and anacron. This lesson explains how the cron daemon reads its schedule files, how to read the five time fields of a crontab entry, how anacron runs jobs that were missed while a machine was off, and how at queues a job to run once. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 The cron daemon and its files 0:55 The five time fields 1:23 The crontab command 1:52 The cron job environment 2:22 anacron 2:58 at, atq, atrm, and batch 3:25 Practice question 4:02 Answer and recap 4:29 Keep learning What this lesson covers - The cron daemon, user crontabs, /etc/crontab, and /etc/cron.d - The five time fields of a crontab entry and the characters used in them - Managing a user crontab with crontab -e, -l, -r, and -u, and the cron.allow and cron.deny files - The environment a cron job runs in, and why full paths and output redirection matter - How anacron uses /etc/anacrontab and timestamps to run overdue daily, weekly, and monthly jobs - One-time jobs with at, atq, atrm, and batch Covered in depth in Module 08 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Crontab
Descrição da aula 58: Packages, Repositories, and Dependencies | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Packages, repositories, and dependencies are part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment, including installation, update, and removal, the repository, package dependencies and conflicts, and package managers. This lesson explains what a package file contains, how the low-level and high-level package managers differ, what a repository publishes, and how dependencies and conflicts decide whether a transaction can proceed. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 What a package contains 0:58 Package managers and the database 1:24 Repositories 1:59 Dependencies 2:33 Dependency resolution 3:01 Conflicts and obsoletes 3:28 Practice question 4:15 Answer and recap 4:48 Keep learning What this lesson covers - The two parts of a package: the payload of files and the metadata in the header - The low-level tools rpm and dpkg, the high-level managers dnf and apt, and the package database - What a repository is, with BaseOS and AppStream on RHEL 9 and the Ubuntu components - How dnf and apt refresh their local copy of the repository metadata - Dependencies as capabilities, hard and weak dependencies, and dependency resolution - Declared conflicts, file conflicts, and the Obsoletes field Covered in depth in Module 07 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #PackageManagement
Descrição da aula 59: The RPM Family: rpm, dnf, yum, and zypper | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The RPM family of package managers is part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment, including installation, update, and removal with package managers. This lesson explains how the rpm command installs, upgrades, erases, queries, and verifies packages, how dnf and yum work from repositories on Red Hat systems, and how zypper does the same work on SUSE. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Low-level and high-level tools 0:53 rpm install, upgrade, and erase 1:19 rpm queries and verification 1:54 dnf install, upgrade, and remove 2:24 dnf history and configuration files 2:52 zypper on SUSE 3:25 Practice question 4:02 Answer and recap 4:33 Keep learning What this lesson covers - How the low-level rpm command and the high-level dnf, yum, and zypper commands divide the work - Installing, upgrading, freshening, and erasing packages with rpm -i, -U, -F, and -e - Querying the package database with rpm -qa, -qi, -ql, -qc, and -qf, and verifying files with rpm -V - Installing, updating, and removing software from repositories with dnf - Reading and reversing changes with dnf history and dnf downgrade, and reviewing .rpmnew and .rpmsave files - The zypper subcommands refresh, install, remove, update, patch, and dist-upgrade on SUSE Covered in depth in Module 07 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #RPM
Descrição da aula 60: The Debian Family: dpkg, apt, apt-get, and apt-cache | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The Debian family of package managers is part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment, including installation, update, and removal with package managers. This lesson explains how the dpkg command installs, removes, and queries package files, how to read the state codes in the dpkg -l listing, and how apt, apt-get, and apt-cache work from repositories on Debian and Ubuntu systems. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Low-level and high-level tools 1:00 dpkg operations 1:33 dpkg state codes 2:05 apt update and upgrade 2:35 Installing and removing with apt 3:08 apt-cache and package configuration 3:44 Practice question 4:15 Answer and recap 4:47 Keep learning What this lesson covers - How the low-level dpkg command and the high-level apt, apt-get, and apt-cache commands divide the work - Installing, removing, purging, and querying packages with dpkg -i, -r, -P, -l, -L, -S, and -s - Reading the dpkg -l state codes ii and rc, and recovering from a missing dependency with apt-get install -f - Refreshing repository indexes with apt update, and the difference between apt upgrade and apt full-upgrade - Installing and removing software with apt install, remove, purge, and autoremove, including declared package conflicts - Querying with apt-cache search, show, and policy, and software configuration with dpkg-reconfigure Covered in depth in Module 07 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Debian
Descrição da aula 61: Repository Management: Third-Party Repos, GPG, Exclusions | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Repository management is part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment. This lesson explains how repositories are enabled and disabled, how third-party repositories are added, how GPG signatures establish trust in a publisher, and how package and repository exclusions limit what a repository may supply. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:33 GPG signatures and trust 1:01 The RHEL repository file 1:35 Enabling and disabling repositories 2:11 Third-party repositories with APT 2:46 Exclusions with dnf 3:19 Pinning and holds with APT 3:50 Practice question 4:31 Answer and recap 5:05 Keep learning What this lesson covers - How a publisher signs a repository and why the administrator verifies the key fingerprint through a separate channel - The settings in a .repo file under /etc/yum.repos.d: baseurl, enabled, gpgcheck, repo_gpgcheck, and gpgkey - Enabling and disabling repositories with dnf config-manager, --enablerepo, and --disablerepo - Adding third-party repositories such as EPEL, and scoping a key to one APT repository with Signed-By - Package and repository exclusions with exclude= and includepkgs= in dnf - Pin priorities in /etc/apt/preferences.d and holds with apt-mark on Debian and Ubuntu Covered in depth in Module 07 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #PackageManagement
Descrição da aula 62: Installing from Source and pip, cargo, and npm | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Installing from source and the language-specific package managers are part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment, including installation, update, and removal from source and with the language-specific tools pip, cargo, and npm. This lesson explains the configure, make, and make install sequence, where source-built software belongs, and how pip, cargo, and npm install packages outside the package database. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Why build from source 0:52 configure, make, and make install 1:29 Build prerequisites and install locations 2:01 pip and Python packages 2:34 cargo and Rust crates 3:03 npm and Node.js packages 3:38 Practice question 4:16 Answer and recap 4:49 Keep learning What this lesson covers - Why an administrator builds from source, and what a source build costs in tracking and patching - The build sequence: verify and extract the tarball, ./configure --prefix, make, and make install - Build prerequisites, development packages, and the /usr/local and /opt install locations - pip and requirements.txt, the externally managed system Python, virtual environments, and pipx - cargo install, crates.io, and why Rust programs are rebuilt to receive dependency fixes - npm local and global installs, and the shared risks of public registries Covered in depth in Module 07 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #pip
Descrição da aula 63: Sandboxed Applications and Update Alternatives | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Sandboxed applications and update alternatives are part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment. This lesson explains how snap, Flatpak, and AppImage deliver applications with their own libraries, how update-alternatives selects the program behind a generic command name, and how software configuration is kept separate from packaged defaults. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 What a sandboxed format changes 0:56 Snap 1:26 Flatpak 1:56 AppImage 2:24 Update alternatives 3:04 Software configuration 3:40 Practice question 4:22 Answer and recap 4:56 Keep learning What this lesson covers - How a sandboxed format differs from a native package, and what it costs - Snap: snapd, automatic updates, snap revert, and strict and classic confinement - Flatpak: remotes such as Flathub, shared runtimes, bubblewrap, and portals - AppImage: one executable file with no sandbox by default and no central updates - update-alternatives and alternatives: the link chain, auto and manual mode, and the --display, --config, --set, and --auto options - Software configuration: vendor defaults, drop-in directories, and supported tools such as dpkg-reconfigure Covered in depth in Module 07 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Flatpak
Descrição da aula 64: NTP, PTP, and DHCP: Basic Service Configuration | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Basic configuration of time and address services is part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment. This lesson explains how NTP keeps clocks in agreement with chrony, where PTP is used for higher accuracy, and how a DHCP server leases addresses with Kea or dhcpd. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 How NTP works 0:57 Configuring chrony 1:31 Verifying and serving time 2:01 Precision Time Protocol 2:30 The DHCP lease exchange 3:01 Kea and dhcpd 3:34 Practice question 4:15 Answer and recap 4:45 Keep learning What this lesson covers - How NTP measures offset and delay over UDP port 123, and how strata, slewing, and stepping work - The chrony directives server, pool, iburst, makestep, and rtcsync in /etc/chrony.conf - Reading chronyc sources and chronyc tracking, and serving time with an allow directive - How PTP reaches sub-microsecond accuracy with hardware timestamping, ptp4l, and phc2sys - The DHCP discover, offer, request, acknowledge exchange, lease renewal, and relay agents - Pools, options, and reservations in Kea and ISC dhcpd, and the syntax test for each Covered in depth in Module 14 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #NetworkServices
Descrição da aula 65: DNS Services: Resolvers, Zones, Records, and BIND | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Basic DNS service configuration is part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment. This lesson explains the difference between a caching resolver and an authoritative server, the records stored in a zone, and how BIND is configured for each role. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:22 Resolvers and authoritative servers 0:54 Zones and resource records 1:25 BIND packages and files 1:50 BIND as a caching resolver 2:22 Serving an authoritative zone 2:53 Validating and loading changes 3:24 Practice question 4:06 Answer and recap 4:36 Keep learning What this lesson covers - Caching resolvers, authoritative servers, and recursive and iterative queries - The main resource record types: SOA, NS, A, AAAA, CNAME, MX, and PTR - BIND packages, the named unit, and configuration file locations on RHEL, Debian, and Ubuntu - The listen-on, allow-query, allow-recursion, and forwarders settings for a caching resolver - A zone statement, the SOA serial, and the trailing dot rule in a zone file - Validating and loading changes with named-checkconf, named-checkzone, and rndc reload Covered in depth in Module 14 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #DNS
Descrição da aula 66: Web and Mail Services: Apache, Nginx, SMTP, and IMAP4 | CompTIA Linux+ XK0-006 (Objective 2.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Basic configuration of web and mail services is part of CompTIA Linux+ XK0-006 objective 2.4, which covers configuring and managing software in a Linux environment. This lesson explains HTTP, the Apache HTTP Server (httpd) and Nginx with virtual hosts, SMTP with Postfix, and IMAP4 with Dovecot. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 HTTP basics 0:54 Apache HTTP Server 1:24 Virtual hosts and Nginx 1:57 SMTP roles and ports 2:25 Configuring Postfix 2:53 IMAP4 with Dovecot 3:26 Practice question 4:07 Answer and recap 4:36 Keep learning What this lesson covers - HTTP as a request and response protocol: ports 80 and 443, status classes, and the Host header - Where the Apache HTTP Server keeps its files on RHEL (httpd) and on Debian and Ubuntu (apache2), and how a change is tested and reloaded - Apache virtual hosts and Nginx server blocks, and which site answers a request that matches no name - SMTP relay on port 25, submission on port 587, and MX record lookups - Postfix configuration with main.cf, postconf, relayhost, and mynetworks - IMAP4 with Dovecot: ports 143 and 993, dovecot.conf, and the mail_location setting Covered in depth in Module 14 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #WebAndMailServers
Descrição da aula 67: systemd Units: Services, Timers, Mounts, and Targets | CompTIA Linux+ XK0-006 (Objective 2.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io systemd and its units are part of CompTIA Linux+ XK0-006 objective 2.5, which covers managing Linux using systemd. This lesson explains what a unit and a unit file are, the four unit types the objective names (services, timers, mounts, and targets), where unit files are stored, and how targets and dependencies decide what starts at boot. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Units and unit files 0:54 The four unit types 1:20 Where unit files are stored 2:01 Targets and the boot goal 2:31 Dependencies and ordering 2:59 Timers and mount units 3:32 Practice question 4:03 Answer and recap 4:35 Keep learning What this lesson covers - systemd as PID 1, and how a unit name carries its type in a suffix such as .service - The four unit types in the objective: services, timers, mounts, and targets - The three unit file directories and their precedence, and systemctl cat to show the file in use - Targets and the boot goal: multi-user.target, graphical.target, default.target, get-default, and set-default - Requirement settings (Wants= and Requires=) and ordering settings (After= and Before=) - How timers start services and how mount units are named after their mount point Covered in depth in Module 10 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #systemd
Descrição da aula 68: Managing Unit States with systemctl: start, enable, mask | CompTIA Linux+ XK0-006 (Objective 2.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Managing unit states with systemctl is part of CompTIA Linux+ XK0-006 objective 2.5, which covers managing Linux using systemd. This lesson explains the difference between the runtime state and the boot state of a unit, and the verbs that read or change them: status, start, stop, restart, reload, enable, disable, mask, and unmask. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Runtime state and boot state 0:59 Reading systemctl status 1:26 start, stop, and restart 1:54 reload compared with restart 2:23 enable and disable 2:56 mask and unmask 3:26 Practice question 4:02 Answer and recap 4:33 Keep learning What this lesson covers - Runtime state and boot state, and why a started service is not an enabled service - Reading systemctl status: the Loaded and Active lines, the main PID, and the control group - start, stop, and restart, and what each does to the running service - reload compared with restart, and the ExecReload= line a reload depends on - enable, disable, and the --now option - mask and unmask, and why a disabled unit can still be started Covered in depth in Module 10 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #systemctl
Descrição da aula 69: Writing systemd Units: systemctl edit and daemon-reload | CompTIA Linux+ XK0-006 (Objective 2.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Writing and editing systemd units is part of CompTIA Linux+ XK0-006 objective 2.5, which covers managing Linux using systemd. This lesson explains the three sections of a service unit file, how a new unit is written and loaded, what systemctl daemon-reload does, and how systemctl edit changes a packaged unit with a drop-in file. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 The three sections of a unit file 0:57 Service settings 1:25 Writing a new unit file 1:56 Loading changes with daemon-reload 2:28 Drop-in files and systemctl edit 2:54 Full overrides and revert 3:23 Practice question 4:07 Answer and recap 4:36 Keep learning What this lesson covers - The [Unit], [Service], and [Install] sections of a service unit file - Service settings: Type=, ExecStart=, User=, and Restart= - Writing a new unit in /etc/systemd/system and checking it with systemd-analyze verify - systemctl daemon-reload: what it rereads, and why a running service still needs a restart - Drop-in files and systemctl edit, which writes override.conf and reloads automatically - systemctl edit --full, systemctl revert, and systemctl cat Covered in depth in Module 10 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #systemd
Descrição da aula 70: systemd Timers and Mount Units: OnCalendar and Automount | CompTIA Linux+ XK0-006 (Objective 2.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io systemd timers and mount units are part of CompTIA Linux+ XK0-006 objective 2.5, which covers managing Linux using systemd. This lesson explains how a timer unit activates a service on a schedule, how OnCalendar and the interval settings define that schedule, and how mount and automount units attach filesystems. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:24 How a timer works 0:53 OnCalendar schedules 1:22 Interval timers and options 1:52 Timers and cron 2:17 Mount units 2:47 Automount units 3:17 Practice question 3:55 Answer and recap 4:24 Keep learning What this lesson covers - How a timer unit and a service unit work as a pair, and why the timer is the unit that is enabled - OnCalendar schedules, their shorthand words, and systemd-analyze calendar to check a value - Interval settings (OnBootSec= and OnUnitActiveSec=) and the Persistent=true and RandomizedDelaySec= options - How a timer differs from cron in logging, missed runs, and listing jobs with systemctl list-timers - Mount units: naming after the mount point, and the What=, Where=, Type=, and Options= settings - Automount units, TimeoutIdleSec=, and the x-systemd.automount option in /etc/fstab Covered in depth in Module 10 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #systemd
Descrição da aula 71: Host Configuration Utilities and systemd-analyze | CompTIA Linux+ XK0-006 (Objective 2.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The host configuration utilities and boot analysis are part of CompTIA Linux+ XK0-006 objective 2.5, which covers managing Linux using systemd. This lesson explains hostnamectl, timedatectl, systemd-resolved with resolvectl, and sysctl, and then shows how systemd-analyze measures a boot and finds the unit that delayed it. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Host names with hostnamectl 0:54 Time and time zones with timedatectl 1:28 systemd-resolved and resolvectl 2:01 Kernel parameters with sysctl 2:35 Boot phases with systemd-analyze 3:07 blame and critical-chain 3:34 Practice question 4:17 Answer and recap 4:50 Keep learning What this lesson covers - hostnamectl and the static, transient, and pretty host names - timedatectl: the time zone, the /etc/localtime link, and set-ntp - systemd-resolved, the stub address 127.0.0.53, and resolvectl status and query - sysctl: kernel parameters under /proc/sys, sysctl -w, and permanent values in /etc/sysctl.d - systemd-analyze and its boot phases: kernel, initrd, and userspace - systemd-analyze blame (listed in the objectives as systemd-blame) and critical-chain Covered in depth in Module 10 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #systemd
Descrição da aula 72: Containers and Runtimes: runC, containerd, Podman, Docker | CompTIA Linux+ XK0-006 (Objective 2.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Containers and container runtimes are part of CompTIA Linux+ XK0-006 objective 2.6, which covers managing applications in a container on a Linux server. This lesson explains what a container is, how runC, containerd, Docker, and Podman relate to each other, and the difference between privileged and unprivileged containers. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 What a container is 1:02 runC and the OCI runtime 1:36 containerd and Docker 2:10 Podman 2:35 Rootful and rootless containers 3:07 The privileged option 3:35 Practice question 4:14 Answer and recap 4:46 Keep learning What this lesson covers - What a container is: host processes isolated by namespaces, limited by cgroups, and given a root filesystem from an image - runC as the reference OCI runtime, and crun as the default runtime for Podman on RHEL 9 - How Docker passes a request from the docker client through dockerd and containerd to runC - Podman as a daemonless engine, and why membership in the docker group is equivalent to root access - Rootful and rootless (unprivileged) containers, and the subordinate ID range in /etc/subuid - The --privileged option, and the narrower --cap-add and --device options Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Containers
Descrição da aula 73: Container Images: Tags, Layers, Pruning, and Dockerfiles | CompTIA Linux+ XK0-006 (Objective 2.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Container image operations are part of CompTIA Linux+ XK0-006 objective 2.6, which covers managing applications in a container on a Linux server. This lesson explains how an image is pulled from a registry, how its layers are stored and shared, how a Dockerfile builds an image, and how tags and pruning manage the images on a host. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 Pulling images from a registry 1:09 Image layers 1:36 Building an image from a Dockerfile 2:05 USER, ENTRYPOINT, and CMD 2:32 Tags and digests 2:58 Pruning images 3:28 Practice question 4:16 Answer and recap 4:45 Keep learning What this lesson covers - The parts of an image reference (registry, namespace, repository, tag) and pulling images with podman pull - Layers: read-only, shared between images, and stacked under a writable layer for each container - Building an image from a Dockerfile with FROM, RUN, and COPY, and the podman build -t command - The USER, ENTRYPOINT, and CMD instructions, and how run-time arguments replace CMD - Tags as movable names, the latest tag, and digests - Pruning with podman image prune, podman rmi, and podman system prune Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Containers
Descrição da aula 74: Running Containers: run, exec, logs, inspect, and stop | CompTIA Linux+ XK0-006 (Objective 2.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Running and managing containers is part of CompTIA Linux+ XK0-006 objective 2.6, which covers managing applications in a container on a Linux server. This lesson explains what the run command does, how environmental variables are set, and how the administrator inspects a container, reads its logs, runs commands inside it, and stops and deletes it. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 What the run command does 0:59 Run options and tags 1:30 Environmental variables 2:01 Listing and inspecting containers 2:32 Logs and exec 3:04 Stopping, starting, and deleting 3:34 Practice question 4:08 Answer and recap 4:41 Keep learning What this lesson covers - What podman run does: find or pull the image, create the container, start it, and detach with -d - Common run options (-d, --name, -p, -it, --rm) and why the image tag is fixed at creation - Environmental variables set by ENV in the Dockerfile, by --env-file, and by -e - Listing containers with podman ps -a, exit codes, and podman inspect with --format - Reading container logs with podman logs and running commands with podman exec - Stopping, starting, deleting, and pruning containers with stop, start, rm, and container prune Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Containers
Descrição da aula 75: Container Volumes: Create, Map, Prune, Overlay, SELinux | CompTIA Linux+ XK0-006 (Objective 2.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Container volumes are part of CompTIA Linux+ XK0-006 objective 2.6, which covers managing applications in a container on a Linux server. This lesson explains overlay storage, how to create, map, and prune volumes with Podman, and the SELinux context that a bind-mounted host directory needs. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Overlay storage 1:00 Create volume 1:27 Mapping volume 1:59 Pruning 2:25 SELinux context 2:58 The :z and :Z options 3:29 Practice question 4:13 Answer and recap 4:45 Keep learning What this lesson covers - Overlay storage: read-only image layers, the writable upper directory, and why its contents are deleted with the container - Create volume: podman volume create, podman volume ls, and podman volume inspect - Mapping volume with -v source:destination, and how a named volume differs from a bind mount - Pruning with podman volume prune and podman system prune --volumes - SELinux context: container_t, container_file_t, and why a bind mount receives Permission denied - The :z and :Z options, and the directories they must never be used on Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Containers
Descrição da aula 76: Container Networks: Bridge, macvlan, ipvlan, Port Mapping | CompTIA Linux+ XK0-006 (Objective 2.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Container networks are part of CompTIA Linux+ XK0-006 objective 2.6, which covers managing applications in a container on a Linux server. This lesson explains how to create and prune a network with Podman, how port mapping publishes a service, and how the bridge, host, none, macvlan, ipvlan, and overlay network types differ. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Create network 1:01 Managing and pruning networks 1:30 Port mapping 2:01 Bridge, host, and none 2:33 macvlan and ipvlan 3:01 Overlay 3:28 Practice question 4:01 Answer and recap 4:32 Keep learning What this lesson covers - Create network: podman network create, and the name resolution that a user-defined network adds - podman network ls, inspect, and connect, and pruning with podman network prune - Port mapping with -p and -P, the podman port command, and the rootless limit on ports below 1024 - The bridge, host, and none types, and how much of the host network each one shares - macvlan and ipvlan, which place containers directly on the physical LAN - The overlay type, which spans several Docker hosts with VXLAN tunnels Covered in depth in Module 18 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Containers
Descrição da aula 77: PAM and Polkit: Authentication and Authorization | CompTIA Linux+ XK0-006 (Objective 3.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Pluggable Authentication Modules (PAM) and Polkit are part of CompTIA Linux+ XK0-006 objective 3.1, which covers authorization, authentication, and accounting methods. This lesson explains how a login program finds its PAM policy, how module types and control flags decide the result of a stack, and how Polkit authorizes a single operation performed by a privileged service. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 How a program finds its PAM policy 0:59 The four module types 1:25 Control flags 1:55 Shared stacks and safe changes 2:21 How Polkit decides 2:54 Polkit rules, pkexec, and sudo 3:23 Practice question 4:07 Answer and recap 4:40 Keep learning What this lesson covers - How a PAM-aware program uses libpam and its service file in /etc/pam.d - The four module types: auth, account, password, and session - The control flags required, requisite, sufficient, and optional, plus include and substack - Shared stacks managed by authselect on RHEL and pam-auth-update on Ubuntu, and safe editing habits - Polkit subjects, mechanisms, the polkitd authority, actions, and the auth_admin default - Polkit rules in /etc/polkit-1/rules.d, the pkexec command, and how Polkit differs from sudo Covered in depth in Module 15 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Polkit
Descrição da aula 78: Directory Services: LDAP, Kerberos, SSSD, Winbind, Samba | CompTIA Linux+ XK0-006 (Objective 3.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Directory services are part of CompTIA Linux+ XK0-006 objective 3.1, which covers authorization, authentication, and accounting methods. This lesson explains how a Linux host uses LDAP for identity and Kerberos for authentication, how SSSD and Winbind connect the host to a directory, what Samba does, and how the realm command joins a host to a domain. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:34 Identity and authentication 1:05 LDAP 1:33 Kerberos 2:06 SSSD 2:42 Samba and Winbind 3:14 The realm command 3:41 Practice question 4:18 Answer and recap 4:45 Keep learning What this lesson covers - The two questions a joined host asks: identity through NSS and authentication through PAM - LDAP entries and distinguished names, ports 389 and 636, StartTLS, LDAPS, and ldapsearch - Kerberos tickets from the KDC, single sign-on, kinit, the keytab, and the clock and DNS requirements - SSSD as the directory client, its local cache, and /etc/sssd/sssd.conf - Samba, /etc/samba/smb.conf, and Winbind mapping of Windows SIDs to UIDs and GIDs - The realm command: discover, join, list, permit, and leave Covered in depth in Module 15 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Kerberos
Descrição da aula 79: System Logging: journalctl, rsyslog, logrotate, /var/log | CompTIA Linux+ XK0-006 (Objective 3.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io System logging is part of CompTIA Linux+ XK0-006 objective 3.1, which covers authorization, authentication, and accounting methods. This lesson explains how the systemd journal and rsyslog work together, how the administrator queries the journal with journalctl, where the text logs sit under /var/log, and how logrotate limits their size. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Where a log message goes 0:59 Text logs under /var/log 1:28 Filtering with journalctl 2:02 Making the journal persistent 2:33 rsyslog rules 3:10 Rotating logs with logrotate 3:38 Practice question 4:22 Answer and recap 4:53 Keep learning What this lesson covers - How a message travels from systemd-journald to the journal, to rsyslog, and to text files - The main files under /var/log on the RHEL family and on Ubuntu and Debian - journalctl filters: -u, -b, -p, --since, --until, -k, and -f - Volatile and persistent journal storage, Storage=persistent, and SystemMaxUse - rsyslog rules: facility, priority, action, and forwarding with @ and @@ - logrotate directives: daily, weekly, rotate, compress, and postrotate Covered in depth in Module 15 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Logging
Descrição da aula 80: System Auditing: auditd, audit.rules, auditctl, ausearch | CompTIA Linux+ XK0-006 (Objective 3.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io System auditing is part of CompTIA Linux+ XK0-006 objective 3.1, which covers authorization, authentication, and accounting methods. This lesson explains what the Linux audit system records, how auditd writes the audit log, how rules are written with auditctl and kept in audit.rules, and how ausearch and aureport read the trail. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 What the audit system records 0:57 The audit daemon 1:27 Rules with auditctl 1:52 The audit.rules file 2:24 The login user ID 2:51 ausearch and aureport 3:20 Practice question 4:03 Answer and recap 4:37 Keep learning What this lesson covers - The three kinds of audit event: system calls, file watches, and user-space reports from PAM, sudo, and SELinux - The auditd daemon, /var/log/audit/audit.log, /etc/audit/auditd.conf, and auditctl -s - File watches and system call rules written with auditctl - Persistent rules in /etc/audit/rules.d, augenrules --load, the generated audit.rules file, and locking with -e 2 - The login user ID (auid) and session number that attribute each event to the person who logged in - Searching events with ausearch and summarizing them with aureport Covered in depth in Module 15 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #auditd
Descrição da aula 81: Netfilter and Packet Filtering: Stateful vs. Stateless | CompTIA Linux+ XK0-006 (Objective 3.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Netfilter and packet filtering are part of CompTIA Linux+ XK0-006 objective 3.2, which covers configuring and implementing firewalls on a Linux system. This lesson explains the Netfilter module, the five hooks on the path of a packet, how chains and rules reach a verdict, and the difference between stateless and stateful filtering with connection tracking. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 The Netfilter module 0:55 The five hooks 1:24 Chains, rules, and verdicts 1:48 Stateless filtering 2:15 Stateful filtering 2:41 The stateful rule set 3:06 Practice question 3:53 Answer and recap 4:25 Keep learning What this lesson covers - The Netfilter module: the kernel framework behind every Linux firewall tool, with nf_tables, nf_conntrack, and nf_nat - The five hooks: prerouting, input, forward, output, and postrouting - Chains, rules, the first-match order, the chain policy, and the accept, drop, and reject verdicts - Stateless filtering: each packet judged alone, and why return rules keyed on source port are weak - Stateful filtering: connection tracking and the new, established, related, and invalid states - The standard stateful input rule set and the limit of the connection tracking table Covered in depth in Module 16 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Netfilter
Descrição da aula 82: iptables, nftables, and ipset: Linux Firewall Rules | CompTIA Linux+ XK0-006 (Objective 3.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The iptables, nftables, and ipset tools are part of CompTIA Linux+ XK0-006 objective 3.2, which covers configuring and implementing firewalls on a Linux system. This lesson explains how the iptables syntax reaches the nftables engine, how iptables rules are written, ordered, and saved, how the nft command manages tables, chains, and rule files, and how ipset and nftables named sets hold address lists. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 Two syntaxes, one engine 0:51 The iptables command 1:22 Rule order and persistence 1:51 nftables and the nft command 2:22 ipset 2:49 Named sets and translation 3:17 Practice question 3:57 Answer and recap 4:25 Keep learning What this lesson covers - How iptables-nft writes the traditional iptables syntax into nf_tables, and how iptables -V shows it - The parts of an iptables command and the -A, -I, -D, -P, and -S options - Rule order on a remote server, and persistence with iptables-save, iptables-restore, and the boot services - The nft command: explicit tables and chains, the inet family, handles, nft list ruleset, and nft -f - ipset: one iptables rule that matches a whole address list, and ipset save - nftables named sets, iptables-translate, and why one tool should own the rule set Covered in depth in Module 16 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #iptables
Descrição da aula 83: firewalld and ufw: Zones, Rich Rules, Ports vs. Services | CompTIA Linux+ XK0-006 (Objective 3.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io firewalld and the Uncomplicated Firewall (ufw) are part of CompTIA Linux+ XK0-006 objective 3.2, which covers configuring and implementing firewalls on a Linux system. This lesson explains firewall-cmd, zones, ports versus services, the runtime and permanent configurations, and rich rules in firewalld, then shows how ufw names ports, services, and application profiles. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 firewalld and firewall-cmd 0:54 Zones 1:22 Ports versus services 1:48 Runtime versus permanent 2:16 Rich rules 2:47 Uncomplicated Firewall (ufw) 3:22 Practice question 4:12 Answer and recap 4:41 Keep learning What this lesson covers - firewalld as the Netfilter front end on the RHEL family, controlled with firewall-cmd - Zones, and how firewalld chooses one by source address, interface, or the default zone - Ports versus services: --add-port, --add-service, and custom service definitions - Runtime versus permanent: --permanent, --reload, and --runtime-to-permanent - Rich rules for source restrictions, logging, and explicit reject or drop actions - ufw on Ubuntu: ports, service names from /etc/services, application profiles, and immediate saving Covered in depth in Module 16 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #firewalld
Descrição da aula 84: NAT and IP Forwarding: SNAT, DNAT, PAT, and ip_forward | CompTIA Linux+ XK0-006 (Objective 3.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Address translation and IP forwarding are part of CompTIA Linux+ XK0-006 objective 3.2, which covers configuring and implementing firewalls on a Linux system. This lesson explains the net.ipv4.ip_forward kernel parameter, how NAT works with connection tracking, and the difference between SNAT, masquerade, PAT, and DNAT on a Linux gateway. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 IP forwarding 0:56 Network address translation 1:24 SNAT and masquerade 1:54 Port address translation 2:22 DNAT and port forwarding 2:51 Tools and common faults 3:18 Practice question 3:58 Answer and recap 4:30 Keep learning What this lesson covers - IP forwarding: the net.ipv4.ip_forward parameter, sysctl -w, and a persistent file under /etc/sysctl.d/ - Network address translation (NAT) and how connection tracking applies it to a whole flow - Source Network Address Translation (SNAT) at the postrouting hook, and masquerade for a changing address - Port Address Translation (PAT), which Linux performs automatically with SNAT and masquerade - Destination Network Address Translation (DNAT) at the prerouting hook for port forwarding - Where NAT rules live in nftables, iptables, and firewalld, and the two common gateway faults Covered in depth in Module 16 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #NAT
Descrição da aula 85: File Permissions and Ownership: chmod, chown, and chgrp | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io File permissions and ownership are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how to read the permission string, what read, write, and execute mean on files and directories, how the kernel chooses which bits apply, and how chmod, chown, and chgrp change the mode, the owner, and the group. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 The permission string 0:58 Files and directories 1:25 Which triad applies 1:49 chmod with octal notation 2:18 chmod with symbolic notation 2:50 chown and chgrp 3:14 Practice question 3:51 Answer and recap 4:20 Keep learning What this lesson covers - The permission string from ls -l: the file type character, the three triads, and the optional SELinux or ACL mark - What read, write, and execute mean on a regular file and on a directory - How the kernel applies exactly one triad, and how root is treated - chmod with octal notation, and the common modes 755, 750, 644, and 600 - chmod with symbolic notation: the u, g, o, and a classes, the +, -, and = operators, and capital X - chown and chgrp, and who may change the owner and the group of a file Covered in depth in Module 06 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #chmod
Descrição da aula 86: umask, setuid, setgid, and the Sticky Bit | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The umask and the special permissions are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how the default user file-creation mode mask sets the mode of new files and directories, where the mask comes from, and what the setuid, setgid, and sticky bits do on files and directories. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 How the umask works 0:53 Viewing and setting the umask 1:20 Choosing a mask 1:46 Special permissions and setuid 2:13 setgid 2:37 The sticky bit 3:06 Practice question 3:45 Answer and recap 4:18 Keep learning What this lesson covers - How the umask clears bits from the requested mode of 666 for files and 777 for directories - The umask command, umask -S, the UMASK line in /etc/login.defs, and the systemd UMask= directive - The results of umask 022, 027, and 077, and what the mask does not change - The special permissions as a leading octal digit, and setuid on programs such as passwd - setgid on executables and on shared directories, set with chmod g+s - The sticky bit on shared directories such as /tmp, set with chmod +t Covered in depth in Module 06 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #umask
Descrição da aula 87: ACLs and File Attributes: setfacl, getfacl, chattr, lsattr | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Access control lists and file attributes are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how an ACL adds named users and named groups to a file, how getfacl and setfacl read and change the entries, how the mask and default ACLs work, and how chattr and lsattr manage the immutable and append only attributes. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 What an ACL adds 0:56 getfacl and setfacl 1:22 The mask and default ACLs 1:48 File attributes, chattr, and lsattr 2:17 The immutable attribute 2:45 The append only attribute 3:15 Practice question 3:49 Answer and recap 4:18 Keep learning What this lesson covers - What an access control list (ACL) adds to the owner, group, and other permissions - getfacl to read an ACL, and the setfacl -m, -x, -b, -R, and -d options - The mask, effective permissions, and default ACLs on a directory - File attributes as filesystem flags that apply to every process, root included - chattr and lsattr, and the immutable and append only attributes - Operation not permitted compared with Permission denied Covered in depth in Module 06 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ACL
Descrição da aula 88: su, sudo, /etc/sudoers, and visudo | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Privilege escalation with su and sudo is part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how su - and sudo differ, how a rule in /etc/sudoers is built, how visudo and /etc/sudoers.d keep the policy safe to edit, and what the NOPASSWD and NOEXEC tags do. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:32 su and su - 1:00 How sudo works 1:23 The /etc/sudoers rule format 1:48 The wheel and sudo groups and sudo -i 2:17 visudo and /etc/sudoers.d 2:46 NOPASSWD and NOEXEC 3:13 Practice question 3:47 Answer and recap 4:19 Keep learning What this lesson covers - How su authenticates as the target account, and why su - starts a clean login shell - How sudo checks the policy, asks for the caller's own password, and logs each command - The parts of a rule in /etc/sudoers: who, where, as whom, an optional tag, and what - The wheel group on RHEL, the sudo group on Ubuntu and Debian, and sudo -i for a root login shell - Editing the policy with visudo, visudo -f, and visudo -c, and local rule files in /etc/sudoers.d - The implications of NOPASSWD and what the NOEXEC tag does and does not block Covered in depth in Module 06 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #sudo
Descrição da aula 89: SELinux Modes: Enforcing, Permissive, and Disabled | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io SELinux and its states are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how SELinux adds mandatory access control to the standard permission check, what the enforcing, permissive, and disabled states do, and how getenforce and setenforce report and switch the mode. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Discretionary and mandatory access control 0:58 How SELinux decides 1:31 The three states 1:59 Reporting the mode 2:21 Switching the mode with setenforce 2:45 The boot-time mode and the disabled state 3:17 Practice question 3:58 Answer and recap 4:29 Keep learning What this lesson covers - Discretionary access control compared with mandatory access control, and the order of the two kernel checks - Security contexts, domains, the targeted policy, and AVC denial records - The three SELinux states: enforcing, permissive, and disabled - Reporting the mode with getenforce and sestatus - Switching the running mode with setenforce 1 and setenforce 0 - The boot-time mode in /etc/selinux/config, the selinux=0 kernel parameter, and relabeling Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SELinux
Descrição da aula 90: SELinux Contexts and Booleans: chcon and semanage | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io SELinux contexts and Booleans are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how to read a context with ls -Z, how chcon, restorecon, and semanage change file labels, how getsebool and setsebool manage Booleans, and how sealert and audit2allow interpret a denial. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Reading a context 0:56 Where labels come from 1:23 chcon and semanage 1:50 Booleans and port types 2:17 Finding and reading a denial 2:42 audit2allow and the order of fixes 3:10 Practice question 3:54 Answer and recap 4:30 Keep learning What this lesson covers - The four fields of an SELinux context and how ls -Z displays them - Why cp gives a file a new label, mv keeps the old one, and restorecon applies the label from the rules - Temporary label changes with chcon and persistent rules with semanage fcontext - Booleans with getsebool and setsebool -P, and port types with semanage port - Finding an AVC denial in the audit log and reading it with sealert - audit2allow -w and -M, and the order of fixes: context, port, Boolean, policy Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SELinux
Descrição da aula 91: SSH Key Authentication, SSH Agent, and Tunneling | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Secure Shell fundamentals are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains what SSH protects, how the sshd daemon is configured, how key authentication differs from password authentication, what the SSH agent does, and how SSH tunneling forwards connections. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 What SSH protects 0:56 The sshd daemon 1:29 Key vs. password authentication 1:56 Creating and installing keys 2:23 The SSH agent 2:52 SSH tunneling 3:25 Practice question 4:07 Answer and recap 4:43 Keep learning What this lesson covers - What SSH protects on TCP port 22, and how the host key and known_hosts identify the server - The sshd daemon, /etc/ssh/sshd_config, drop-in files, sshd -t, and sshd -T - Key vs. password authentication, and why a key sends no reusable secret - Creating a key pair with ssh-keygen and installing it with ssh-copy-id - The SSH agent, ssh-add, agent forwarding, and ProxyJump - SSH tunneling with local, remote, and dynamic forwarding Covered in depth in Module 14 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SSH
Descrição da aula 92: Hardening SSH: PermitRootLogin, AllowUsers, AllowGroups | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Hardening the Secure Shell daemon is part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains where hardening settings go, the four values of PermitRootLogin, key-only access, AllowUsers and AllowGroups, disabling X forwarding, and the server-side controls on SSH tunneling. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 The hardening drop-in 1:00 PermitRootLogin 1:33 Removing the password prompt 2:01 AllowUsers and AllowGroups 2:29 X forwarding and tunnels 3:00 Applying the change safely 3:30 Practice question 4:17 Answer and recap 4:49 Keep learning What this lesson covers - A hardening drop-in in /etc/ssh/sshd_config.d that is read before distribution files - PermitRootLogin and its four values: yes, prohibit-password, forced-commands-only, and no - Key-only access with PasswordAuthentication no and KbdInteractiveAuthentication no - AllowUsers and AllowGroups, and the order in which sshd checks allow and deny lists - Disabling X forwarding, and restricting SSH tunneling with AllowTcpForwarding and PermitOpen - Applying the change safely with sshd -t, sshd -T, a reload, and a test from a second session Covered in depth in Module 14 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SSH
Descrição da aula 93: SFTP, and Avoiding Telnet, FTP, and TFTP | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io The Secure File Transfer Protocol (SFTP) and the direction to avoid unsecure access services are part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains what Telnet, FTP, and TFTP expose on the network, how to find and remove them, how SFTP and scp replace them, and how to confine an SFTP account to its own directory. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 What the unsecure services expose 0:58 Finding and removing them 1:26 Secure File Transfer Protocol 1:59 The sftp client 2:26 scp and rsync 2:54 Confining an SFTP account 3:25 Practice question 4:09 Answer and recap 4:40 Keep learning What this lesson covers - What Telnet (TCP 23), FTP (TCP 21), and TFTP (UDP 69) expose, and what replaces each - Finding the services with ss and the package database, and removing them in order - SFTP as an SSH subsystem on TCP port 22, and how it differs from FTPS - The sftp client: put, get, lcd, bye, and batch mode with sftp -b - Copying files with scp, and rsync over SSH for repeated synchronization - Confining an SFTP account with ChrootDirectory, ForceCommand internal-sftp, and the root ownership rule Covered in depth in Module 14 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SFTP
Descrição da aula 94: OS Hardening: fail2ban, chroot, SUID Removal, Secure Boot | CompTIA Linux+ XK0-006 (Objective 3.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Hardening the operating system is part of CompTIA Linux+ XK0-006 objective 3.3, which covers applying operating system hardening techniques on a Linux system. This lesson explains how fail2ban bans addresses after repeated failures, how chroot confines a process, how unused file systems are disabled, how unnecessary Set User ID (SUID) permissions are found and removed, and how Secure Boot works under UEFI. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 fail2ban 0:56 chroot 1:24 Disabling unused file systems 1:58 Finding SUID programs 2:24 Removing unnecessary SUID permissions 2:52 Secure boot and UEFI 3:22 Practice question 4:00 Answer and recap 4:33 Keep learning What this lesson covers - fail2ban jails, maxretry, findtime, bantime, and where local settings belong - chroot, the ChrootDirectory keyword in sshd, and its ownership rule - Disabling unused file systems with install and blacklist lines in /etc/modprobe.d - Finding SUID and SGID programs with find and the -perm -4000 and -perm -2000 tests - Removal of unnecessary SUID permissions with package removal, chmod u-s, and the nosuid mount option - UEFI Secure Boot, the shim, GRUB 2, and kernel chain, and mokutil --sb-state Covered in depth in Modules 14 and 16 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SystemHardening
Descrição da aula 95: Password Policy, MFA, and Breach Lists | CompTIA Linux+ XK0-006 (Objective 3.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Password policy and multifactor authentication are part of CompTIA Linux+ XK0-006 objective 3.4, which covers account hardening techniques and best practices. This lesson explains password complexity, length, expiration, reuse, and history, the PAM modules that enforce them, checking existing breach lists, and multifactor authentication (MFA). It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 What a password policy controls 1:00 Length and complexity 1:30 History and reuse 2:01 Expiration 2:34 Checking breach lists 3:05 Multifactor authentication 3:35 Practice question 4:16 Answer and recap 4:49 Keep learning What this lesson covers - The five password policy attributes: length, complexity, expiration, history, and reuse - Length and complexity with pam_pwquality: minlen, minclass, dcredit, and dictcheck - History and reuse with pam_pwhistory, the remember option, and /etc/security/opasswd - Expiration with chage and the defaults in /etc/login.defs - Checking existing breach lists with a local dictionary or an online k-anonymity check - Multifactor authentication (MFA) with one-time codes, FIDO2 security keys, and smart cards Covered in depth in Module 15 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #PasswordPolicy
Descrição da aula 96: Restricting Accounts: nologin, rbash, and pam_tally2 | CompTIA Linux+ XK0-006 (Objective 3.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Restricting accounts is part of CompTIA Linux+ XK0-006 objective 3.4, which covers account hardening techniques and best practices. This lesson explains how to avoid running as root, the restricted shells /sbin/nologin and /bin/rbash, and account lockout with pam_tally2 and its replacement, pam_faillock. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Avoid running as root 1:02 The nologin shell 1:31 Limits of nologin 1:59 The rbash restricted shell 2:29 Account lockout with pam_tally2 2:58 pam_faillock, the replacement 3:26 Practice question 4:11 Answer and recap 4:45 Keep learning What this lesson covers - Avoid running as root: sudo per command, dedicated service accounts, and short root shells - The /sbin/nologin shell, how it is set with usermod -s, and what it leaves intact - What a nologin shell does not stop, and why the password is locked as well - The /bin/rbash restricted shell: what it refuses and how it is defeated - Account lockout with pam_tally2, its tally file, and its commands - pam_faillock, the current replacement, and /etc/security/faillock.conf Covered in depth in Module 15 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #AccountHardening
Descrição da aula 97: Encrypting Data at Rest: GPG, LUKS2, and Argon2 | CompTIA Linux+ XK0-006 (Objective 3.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Encrypting data at rest is part of CompTIA Linux+ XK0-006 objective 3.5, which covers cryptographic concepts and technologies in a Linux environment. This lesson explains file encryption with GPG, filesystem encryption with Linux Unified Key Setup 2 (LUKS2), and the Argon2 function that protects a LUKS2 passphrase. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Where data at rest is encrypted 0:57 GPG with a passphrase 1:26 GPG with a public key 1:54 LUKS2 header and keyslots 2:23 Argon2 2:52 Managing a volume with cryptsetup 3:21 Practice question 4:03 Answer and recap 4:35 Keep learning What this lesson covers - What encryption at rest protects, and why an unlocked volume is not protected - File encryption with a GPG passphrase: gpg --symmetric and gpg --decrypt - File encryption with a GPG public key: gpg --encrypt, --recipient, and --sign - The LUKS2 header, keyslots, volume key, and dm-crypt - Argon2id as the LUKS2 default, and why a memory-hard function slows passphrase guessing - The cryptsetup actions luksFormat, open, close, luksAddKey, luksHeaderBackup, and luksDump Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Encryption
Descrição da aula 98: Encryption in Transit: OpenSSL, LibreSSL, TLS, WireGuard | CompTIA Linux+ XK0-006 (Objective 3.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Encrypting data in transit is part of CompTIA Linux+ XK0-006 objective 3.5, which covers cryptographic concepts and technologies in a Linux environment. This lesson explains the Transport Layer Security (TLS) protocol versions, how a version and cipher suite are negotiated, the OpenSSL and LibreSSL libraries, and the WireGuard VPN. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 TLS protocol versions 1:04 Version and cipher negotiation 1:30 OpenSSL 2:04 LibreSSL 2:32 WireGuard 3:04 WireGuard keys and configuration 3:37 Practice question 4:15 Answer and recap 4:49 Keep learning What this lesson covers - TLS protocol versions: SSL and TLS 1.0 and 1.1 are retired, TLS 1.2 is the minimum, and TLS 1.3 is preferred - How the client and server negotiate a protocol version and cipher suite, and why a handshake fails - OpenSSL as a library and a test tool: openssl version and openssl s_client - LibreSSL, the OpenBSD fork of OpenSSL - WireGuard: a kernel VPN over UDP with fixed algorithms and no cipher negotiation - WireGuard keys, AllowedIPs, wg-quick, and wg show Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #WireGuard
Descrição da aula 99: Hashing and Certificates: SHA-256, HMAC, Trusted Roots | CompTIA Linux+ XK0-006 (Objective 3.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Hashing and certificate management are part of CompTIA Linux+ XK0-006 objective 3.5, which covers cryptographic concepts and technologies in a Linux environment. This lesson explains SHA-256, the hashed message authentication code (HMAC), removal of weak algorithms, trusted root certificates from no-cost and commercial certificate authorities, and avoiding self-signed certificates. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:33 Hash functions and SHA-256 1:04 Verifying a file with sha256sum 1:31 HMAC 1:55 Removal of weak algorithms 2:26 Trusted root certificates 2:56 No-cost, commercial, and self-signed 3:28 Practice question 4:12 Answer and recap 4:48 Keep learning What this lesson covers - Hashing: the four properties of a cryptographic hash function and the SHA-256 digest - Verifying a file with sha256sum -c and a signed checksum list - The hashed message authentication code (HMAC) and what a shared secret key adds - Removal of weak algorithms: MD5, SHA-1, and update-crypto-policies on RHEL - Certificate management: the chain to a trusted root certificate and the trust store - No-cost, commercial, and private certificate authorities, and avoiding self-signed certificates Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Hashing
Descrição da aula 100: Vulnerability Detection: CVE, CVSS, Backporting, and IOCs | CompTIA Linux+ XK0-006 (Objective 3.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Vulnerability scanning and detection are part of CompTIA Linux+ XK0-006 objective 3.6, which covers the importance of compliance and audit procedures. This lesson explains Common Vulnerabilities and Exposures (CVEs), the Common Vulnerability Scoring System (CVSS), backporting patches, service misconfigurations, port scanners and protocol analyzers, anti-malware, and indicators of compromise (IOC). It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 CVE identifiers 1:00 CVSS scores 1:26 Backporting patches 1:56 Service misconfigurations 2:26 Port scanners and protocol analyzers 2:57 Anti-malware and IOCs 3:30 Practice question 4:12 Answer and recap 4:47 Keep learning What this lesson covers - Common Vulnerabilities and Exposures (CVEs): what an identifier names and who assigns it - The Common Vulnerability Scoring System (CVSS): the base score and the severity bands - Backporting patches, version-banner false positives, and the package changelog - Service misconfigurations and checking listeners with ss -tlnp - Tools: port scanners such as nmap and protocol analyzers such as tcpdump and Wireshark - Detection and response: anti-malware and indicators of compromise (IOC) Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #VulnerabilityManagement
Descrição da aula 101: Compliance and Integrity: OpenSCAP, CIS Benchmarks, AIDE | CompTIA Linux+ XK0-006 (Objective 3.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Standards and audit, file integrity, and security banners are part of CompTIA Linux+ XK0-006 objective 3.6, which covers the importance of compliance and audit procedures. This lesson explains the Center for Internet Security (CIS) Benchmarks, OpenSCAP scans, the Advanced Intrusion Detection Environment (AIDE), rkhunter, signed package verification, installed file verification, and the three banner files. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 CIS Benchmarks 0:55 OpenSCAP 1:26 AIDE 1:57 rkhunter 2:24 Package verification 3:01 Security banners 3:34 Practice question 4:20 Answer and recap 4:56 Keep learning What this lesson covers - Standards and audit: the CIS Benchmarks and their Level 1 and Level 2 profiles - OpenSCAP: scanning a host against a benchmark profile with oscap xccdf eval - File integrity with AIDE: aide --init, aide --check, and a baseline kept off the host - Rootkit hunter (rkhunter) and what rkhunter --check looks for - Signed package verification and installed file verification with rpm -K, rpm -V, and dpkg --verify - Security banners: /etc/issue, /etc/issue.net, and /etc/motd Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #OpenSCAP
Descrição da aula 102: Secure Data Destruction and the Software Supply Chain | CompTIA Linux+ XK0-006 (Objective 3.6)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Secure data destruction and the software supply chain are part of CompTIA Linux+ XK0-006 objective 3.6, which covers the importance of compliance and audit procedures. This lesson explains overwriting with shred, dd if=/dev/urandom, and badblocks -w, cryptographic destruction of encrypted and flash media, and the controls that reduce software supply chain risk. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Clear, purge, and destroy 0:59 Overwriting with shred 1:29 dd and badblocks -w 2:02 Cryptographic destruction 2:35 Software supply chain 3:07 Supply chain controls 3:39 Practice question 4:25 Answer and recap 4:59 Keep learning What this lesson covers - Secure data destruction: why deleting and formatting leave data in place, and the clear, purge, and destroy levels - shred and its -n, -z, -u, and -v options, and where a file overwrite is unreliable - dd if=/dev/urandom and badblocks -w for overwriting a whole hard disk - Cryptographic destruction with cryptsetup luksErase and the crypto erase of a self-encrypting drive - Software supply chain: the parties software passes through and the xz backdoor of 2024 - Four controls: distribution packages, verified downloads, pinned dependencies, and a software bill of materials (SBOM) Covered in depth in Module 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #DataDestruction
Descrição da aula 103: Ansible: Playbooks, Inventory, Modules, and Facts | CompTIA Linux+ XK0-006 (Objective 4.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Infrastructure as code with Ansible is part of CompTIA Linux+ XK0-006 objective 4.1, which covers the use cases and techniques of automation and orchestration in a Linux environment. This lesson explains infrastructure as code, the agentless model, the inventory, modules and ad hoc commands, playbooks, facts, and collections. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Infrastructure as code 0:57 Ansible is agentless 1:23 Inventory 1:51 Modules and ad hoc commands 2:19 Playbooks 2:48 Facts and collections 3:19 Practice question 4:04 Answer and recap 4:38 Keep learning What this lesson covers - Infrastructure as code: version control, review, idempotence, and drift correction - Agentless Ansible: a control node that pushes modules to managed nodes over SSH - The inventory: hosts, groups, groups of groups, group variables, and ansible-inventory --graph - Modules that declare a desired state, and ad hoc commands that run one module - Playbooks: plays, tasks, handlers, and a preview with --check and --diff - Facts gathered by the setup module, and collections installed with ansible-galaxy Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Ansible
Descrição da aula 104: Puppet and OpenTofu: Classes, Certificates, and State | CompTIA Linux+ XK0-006 (Objective 4.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Puppet and OpenTofu are part of CompTIA Linux+ XK0-006 objective 4.1, which covers the use cases and techniques of automation and orchestration in a Linux environment. This lesson explains the Puppet agent run, classes, modules, facts, certificates, and agent and agentless operation, then OpenTofu providers, resources, the platform API, and state. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 Puppet agent and agentless 1:03 Classes and modules 1:29 Facts from Facter 1:55 Certificates 2:23 OpenTofu providers and resources 2:49 State, plan, and apply 3:18 Practice question 4:03 Answer and recap 4:36 Keep learning What this lesson covers - Agent and agentless Puppet: the agent service, puppet apply, and Puppet Bolt - Resources, classes, and modules, and how site.pp assigns classes to hosts - Facts gathered by Facter and read in a manifest through $facts - Certificates: the Puppet certificate authority, signing requests, and mutual TLS - OpenTofu providers and resources, and the platform API they call - State, and the tofu init, tofu plan, and tofu apply workflow Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Puppet
Descrição da aula 105: Unattended Deployment: Kickstart and cloud-init | CompTIA Linux+ XK0-006 (Objective 4.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Unattended deployment with Kickstart and cloud-init is part of CompTIA Linux+ XK0-006 objective 4.1, which covers the use cases and techniques of automation and orchestration in a Linux environment. This lesson explains how a Kickstart file answers the installer, how cloud-init customizes a prebuilt image on its first boot, and how each is checked. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Two unattended deployment methods 0:55 Kickstart and the installer 1:26 Sections of a Kickstart file 1:59 cloud-init and the datasource 2:30 The cloud-config format 3:00 Stages and checking a first boot 3:35 Practice question 4:08 Answer and recap 4:42 Keep learning What this lesson covers - The two unattended deployment methods: Kickstart during installation and cloud-init on first boot - Kickstart: the Anaconda installer, anaconda-ks.cfg as a template, and the inst.ks= boot parameter - Kickstart file sections: commands, %packages, %pre, and %post, checked with ksvalidator - cloud-init: the datasource, meta-data, and user-data - The cloud-config format and its users, packages, write_files, and runcmd keys - cloud-init stages, the status, schema, and clean commands, and the log file Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Kickstart
Descrição da aula 106: CI/CD: Pipelines, Shift Left Testing, GitOps, and DevSecOps | CompTIA Linux+ XK0-006 (Objective 4.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Continuous integration and continuous deployment (CI/CD) is part of CompTIA Linux+ XK0-006 objective 4.1, which covers the use cases and techniques of automation and orchestration in a Linux environment. This lesson explains version control, continuous integration, delivery and deployment, pipelines, shift left testing, DevSecOps, and GitOps. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Version control 0:56 Integration, delivery, and deployment 1:26 Pipelines 1:54 Shift left testing 2:20 DevSecOps 2:52 GitOps 3:21 Practice question 3:54 Answer and recap 4:25 Keep learning What this lesson covers - Version control as the record of every change and the event that starts a pipeline - Continuous integration, continuous delivery, and continuous deployment, and how they differ - Pipelines: stages, jobs, runners, and what a failed job does - Shift left testing: moving checks toward the commit, where a defect costs least to fix - DevSecOps: secret scanning, static analysis, dependency and image scanning, and signed artifacts - GitOps: a Git repository as the desired state, with an agent that pulls and reconciles Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #CICD
Descrição da aula 107: Kubernetes: Pods, Deployments, Services, and ConfigMaps | CompTIA Linux+ XK0-006 (Objective 4.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Deployment orchestration with Kubernetes is part of CompTIA Linux+ XK0-006 objective 4.1, which covers the use cases and techniques of automation and orchestration in a Linux environment. This lesson explains the cluster, pods, Deployments, Services, ConfigMaps, variables, Secrets, and volumes. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 The Kubernetes cluster 1:00 Pods 1:26 Deployments 1:51 Services 2:22 ConfigMaps and variables 2:52 Secrets and volumes 3:23 Practice question 3:56 Answer and recap 4:29 Keep learning What this lesson covers - The Kubernetes cluster: the control plane, worker nodes, kubectl, and YAML manifests - Pods: one or more containers that share one IP address and can share volumes - Deployments: a pod template, replicas, the ReplicaSet, rolling updates, and kubectl scale - Services: a stable address and DNS name, exposed as ClusterIP, NodePort, or LoadBalancer - ConfigMaps and environment variables that keep configuration outside the image - Secrets, base64 encoding, and volumes backed by a PersistentVolumeClaim Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Kubernetes
Descrição da aula 108: Docker Swarm and Compose: Nodes, Tasks, and Compose Files | CompTIA Linux+ XK0-006 (Objective 4.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Deployment orchestration with Docker Swarm and Docker/Podman Compose is part of CompTIA Linux+ XK0-006 objective 4.1, which covers the use cases and techniques of automation and orchestration in a Linux environment. This lesson explains swarm nodes, services, tasks, networks, and scale, and then the compose file and the up, down, and logs commands. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Swarm nodes 1:00 Services and tasks 1:33 Networks and scale 2:02 The compose file 2:33 Up and down 2:58 Logs and status 3:23 Practice question 4:04 Answer and recap 4:38 Keep learning What this lesson covers - Docker Swarm nodes: managers, workers, docker swarm init, and docker swarm join - Services and tasks: one task for each replica, and each task runs one container - Overlay networks, the routing mesh, and docker service scale - The compose file: services, the project network, named volumes, and secrets - docker compose up and down, and what happens to named volumes - docker compose logs and ps, with Podman Compose reading the same file format Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #DockerSwarm
Descrição da aula 109: Shell Script Structure: Shebang, Execution, Return Codes | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Shell script structure is part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains the interpreter directive (#!), the execute permission, four ways to run a script, and return codes read from $?. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 The interpreter directive 0:51 Three common directives 1:24 Making a script executable 1:54 Four ways to run a script 2:23 Return codes 2:55 Setting and checking the status 3:24 Practice question 4:02 Answer and recap 4:29 Keep learning What this lesson covers - The interpreter directive: the #! line that the kernel reads to choose an interpreter - Three common directives, and why /bin/sh is Bash on RHEL but dash on Debian and Ubuntu - Making a script executable with chmod +x and running it with the ./ prefix - Four ways to run a script: by name, with bash, with source, and with exec - Return codes and $?: 0, 1, 2, 126, 127, and 128 plus a signal number - The exit builtin, bash -n for a syntax check, and bash -x for a trace Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ShellScripting
Descrição da aula 110: Shell Variables and Arguments: export, local, set, unset | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Shell variables and script arguments are part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains assignments, environmental variables, and arguments, and the export, set, unset, local, alias, and unalias commands. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Assigning and reading variables 0:57 Environmental variables and export 1:28 Arguments 2:00 set and unset 2:33 local variables in functions 2:57 alias and unalias 3:29 Practice question 4:02 Answer and recap 4:36 Keep learning What this lesson covers - Assignments: name=value with no spaces, reading a value with $name, and quoting each reference - Environmental variables: export, printenv, and the one-way copy that a child process receives - Arguments: $1, $2, $0, $#, "$@", "$*", and shift - set and unset: listing variables, replacing positional parameters, and the -e, -u, -o pipefail, and -x options - local variables that are confined to a function - alias and unalias, and why a script does not expand aliases Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashScripting
Descrição da aula 111: Parameter Expansion, Command Substitution, and Subshells | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Expansion is part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains parameter expansion with ${var}, command substitution with $(foo) and `foo`, and the subshell written as (foo). It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 The order of expansion 1:05 Parameter expansion 1:38 Operators inside the braces 2:07 Command substitution 2:40 Subshells 3:09 Which shell runs the commands 3:34 Practice question 4:13 Answer and recap 4:46 Keep learning What this lesson covers - The fixed order in which Bash expands a command line, and what double quotes suppress - Parameter expansion: why ${var} marks where a variable name ends - Operators inside the braces for defaults, required values, and trimming a prefix or suffix - Command substitution: the $(foo) form, the older `foo` form, and quoting the result - Subshells: commands in parentheses run in a child copy of the shell, and their changes are discarded - Braces, pipelines, and command substitution: which of them create a subshell Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashScripting
Descrição da aula 112: Tests and Comparisons: File, String, Numeric, and Regex | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Tests and comparisons are part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains the test command, the file tests -f and -d, the string tests -z and -n, the string and numerical comparison operators, and regular expression matching with [[ $foo =~ regex ]]. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 The test command 0:59 File tests and negation 1:26 String tests 1:53 Numerical comparisons 2:27 Single and double brackets 2:56 Regular expressions 3:25 Practice question 4:02 Answer and recap 4:35 Keep learning What this lesson covers - The test command and [ : a test prints nothing and answers with its exit status - File tests with -f and -d, and negation with ! - String tests: -z, -n, =, ==, !=, and the ordering operators < and > - Numerical comparisons: -eq, -ne, -gt, -ge, -lt, and -le, and where <= and >= are valid - How [[ ]] differs from [ ] in quoting, pattern matching, and portability - Regular expression matching with the =~ operator Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashScripting
Descrição da aula 113: Bash Conditional Statements: if, elif, else, and case | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Conditional statements are part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains the if statement with its elif and else branches, guard clauses, the && and || shorthand, and the case statement with its patterns. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 The if statement 0:59 The elif and else branches 1:27 Guard clauses and shorthand 1:57 The case statement 2:25 Patterns in a case statement 2:55 Choosing between if and case 3:21 Practice question 4:01 Answer and recap 4:30 Keep learning What this lesson covers - The if statement: a condition is a command, and the branch depends on its exit status - elif and else: conditions are tested from the top and at most one branch runs - Guard clauses that test a precondition and exit early - The && and || shorthand, and why test && a || b is not an if and else - The case statement: pattern lists, the ;; terminator, the *) default, and esac - Choosing between if and case for thresholds, subcommands, file extensions, and typed answers Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashScripting
Descrição da aula 114: Bash Loops: for, while, and until | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Looping statements are part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains the for, while, and until loops in Bash, the standard form for reading a file line by line, and the break and continue commands. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 Three looping statements 0:54 The for loop 1:22 Looping over files 1:49 The while loop 2:20 The until loop 2:42 break and continue 3:08 Practice question 3:43 Answer and recap 4:13 Keep learning What this lesson covers - The three looping statements, and what ends each one - The for loop: where its list comes from, and the arithmetic form for counters - Looping over files with a pattern instead of $(ls), and the nullglob option - The while loop: reading a file line by line with while IFS= read -r line - The until loop: waiting for a file, a service, or a lock, with a limit - break and continue: leaving a loop or starting the next pass Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashScripting
Descrição da aula 115: Bash Functions and Field Separators: IFS and OFS | CompTIA Linux+ XK0-006 (Objective 4.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Functions and the Internal Field Separator/Output Field Separator (IFS/OFS) are part of CompTIA Linux+ XK0-006 objective 4.2, which covers performing automated tasks using shell scripting. This lesson explains how Bash functions are defined, called, and return results, how IFS controls splitting in Bash, and how OFS controls output in awk. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Defining and calling functions 0:54 Arguments inside a function 1:19 Return status and output 1:43 The internal field separator 2:08 IFS with the read command 2:39 The output field separator 3:10 Practice question 3:50 Answer and recap 4:23 Keep learning What this lesson covers - The two forms of a Bash function definition, and why a function is defined before it is called - Arguments inside a function: $1, $#, "$@", $0, FUNCNAME, and local variables - The return and exit commands, and the difference between a status and captured output - IFS: its default value and its three jobs in Bash - Setting IFS for one read command to split a line into named fields - OFS and FS in awk, and how the commas in a print statement insert OFS Covered in depth in Module 19 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #BashScripting
Descrição da aula 116: Python Data Types, Indentation, and Built-in Modules | CompTIA Linux+ XK0-006 (Objective 4.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Python fundamentals and built-in modules are part of CompTIA Linux+ XK0-006 objective 4.3, which covers summarizing Python basics used for Linux system administration. This lesson explains current versions, indentation, the data types and structures, and the built-in modules of the standard library. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 Current versions 0:57 Indentation 1:26 Integer, floating point, and Boolean 1:52 String 2:18 List and dictionary 2:42 Built-in modules 3:15 Practice question 3:54 Answer and recap 4:22 Keep learning What this lesson covers - Current versions: Python 3 on RHEL 9, Ubuntu 24.04, and Debian 12, and the end of life of Python 2 - Indentations: how a colon and indented lines form a block, and the four-space convention - Integer, floating point, and Boolean values - String values, the strip() and split() methods, and conversion with int() and float() - List and dictionary structures, and how their items are reached - Extensible using modules and packages, and built-in modules such as os, shutil, subprocess, sys, and json Covered in depth in Module 20 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Python
Descrição da aula 117: Python Virtual Environments, pip, and PEP 8 | CompTIA Linux+ XK0-006 (Objective 4.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Setting up a virtual environment, installing dependencies, and Python Enhancement Proposal (PEP) 8 best practices are part of CompTIA Linux+ XK0-006 objective 4.3, which covers Python basics used for Linux system administration. This lesson explains how Python is extended with modules and packages, how dependencies are installed from distribution packages or with pip, how a virtual environment is created and used, and what PEP 8 asks of Python code. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:31 Modules and packages 1:07 Installing dependencies 1:38 Setting up a virtual environment 2:08 Using the environment 2:37 pip and requirements files 3:03 PEP 8 best practices 3:36 Practice question 4:17 Answer and recap 4:45 Keep learning What this lesson covers - Modules, packages, and the order in which import searches for them - The two routes for installing dependencies: distribution packages and pip - Why pip is blocked from the system Python on Debian and Ubuntu (PEP 668) - Creating a virtual environment with python3 -m venv, and using it with or without activation - pip freeze, requirements.txt, and pip install -r for rebuilding an environment - PEP 8 rules for indentation, line length, imports, and naming Covered in depth in Module 20 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Python
Descrição da aula 118: Git: init, config, add, commit, diff, log, and .gitignore | CompTIA Linux+ XK0-006 (Objective 4.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Git fundamentals are part of CompTIA Linux+ XK0-006 objective 4.4, which covers implementing version control using Git. This lesson explains the working tree, the staging area, and the repository, then the config, init, add, commit, diff, and log commands and the .gitignore file. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:26 What Git records 0:55 Setting the identity with git config 1:24 Creating a repository with git init 1:53 Excluding files with .gitignore 2:26 Staging and committing 2:54 Reading changes with git diff and git log 3:26 Practice question 4:01 Answer and recap 4:34 Keep learning What this lesson covers - What a commit records, and the three areas Git works with: working tree, staging area, and repository - git config at the system, global, and local levels, with user.name and user.email - git init and git status for a new repository - .gitignore patterns, and why an entry does not affect a file that is already tracked - git add and git commit as a two-step process, and the commit message - git diff, git diff --staged, and git log with --oneline and -p Covered in depth in Module 20 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Git
Descrição da aula 119: Git Branch, Merge, Squash, Rebase, Reset, and Stash | CompTIA Linux+ XK0-006 (Objective 4.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Git branching and merging is part of CompTIA Linux+ XK0-006 objective 4.4, which covers implementing version control using Git. This lesson explains the branch, checkout, merge, rebase, stash, and reset commands and the squash technique, and when each one is used. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:27 Creating and switching branches 0:51 Merging with git merge 1:25 Squashing commits 1:56 Rebasing with git rebase 2:23 Setting work aside with git stash 2:51 Undoing commits with git reset 3:25 Practice question 4:01 Answer and recap 4:31 Keep learning What this lesson covers - Creating and switching branches with git branch, git checkout, and git checkout -b - The two outcomes of git merge, a fast-forward and a three-way merge, and how a conflict is resolved - Squashing commits with git merge --squash or an interactive rebase - How git rebase replays commits as new commits, and why pushed commits are not rebased - Setting work aside with git stash, and the difference between pop and apply - The --soft, --mixed, and --hard modes of git reset Covered in depth in Module 20 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Git
Descrição da aula 120: Git Remotes: Clone, Fetch, Pull, Push, and Tag | CompTIA Linux+ XK0-006 (Objective 4.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Working with Git remote repositories is part of CompTIA Linux+ XK0-006 objective 4.4, which covers implementing version control using Git. This lesson explains the clone, push, fetch, pull, and tag commands and what each one changes on the local machine and on the server. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Naming a remote 0:56 Copying a repository with git clone 1:24 Publishing commits with git push 1:55 Downloading with git fetch 2:22 Integrating with git pull 2:52 Marking releases with git tag 3:25 Practice question 3:58 Answer and recap 4:28 Keep learning What this lesson covers - What a remote is, the name origin, and the bare repository on a shared server - Copying a repository with git clone, and what a remote-tracking branch records - Publishing commits with git push, setting the upstream with -u, and why a push is rejected - Downloading commits with git fetch and reviewing them before integration - How git pull fetches and then integrates, by fast-forward, merge, or rebase - Lightweight and annotated tags with git tag, and pushing tags to the remote Covered in depth in Module 20 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Git
Descrição da aula 121: Responsible AI: Use Cases, Verification, Data Governance | CompTIA Linux+ XK0-006 (Objective 4.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Responsible use of AI is CompTIA Linux+ XK0-006 objective 4.5, which covers summarizing best practices and responsible uses of artificial intelligence (AI). This lesson explains the common use cases, the two best practices for generated output, data governance, local, private, and public models, corporate policy, and prompt engineering. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Prompt engineering 0:53 Use cases one to four 1:25 Use cases five to eight 1:54 Best practices 2:24 Data governance and security of data 2:54 Local models and corporate policy 3:24 Practice question 4:02 Answer and recap 4:29 Keep learning What this lesson covers - What a large language model (LLM) produces, and why its output is treated as a draft - Prompt engineering: the context, sample input, and constraints a prompt supplies - The eight common use cases, from generation of code to code linting, and how each is verified - The two best practices: avoid copy/paste without review/quality assurance, and verify output - Data governance and security of data: LLM training and human review of prompts - Local models, private vs. public services, and adhering to corporate policy Covered in depth in Module 20 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #ResponsibleAI
Descrição da aula 122: SLA, SLI, SLO, Health Checks, and Log Aggregation | CompTIA Linux+ XK0-006 (Objective 5.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Service monitoring is part of CompTIA Linux+ XK0-006 objective 5.1, which covers summarizing monitoring concepts and configurations in a Linux system. This lesson explains the service-level indicator (SLI), the service-level objective (SLO), the service-level agreement (SLA), health checks, and log aggregation. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Service-level indicator (SLI) 0:58 Service-level objective (SLO) 1:31 Service-level agreement (SLA) 1:56 Health checks 2:26 Running a check on a schedule 2:55 Log aggregation 3:27 Practice question 3:58 Answer and recap 4:27 Keep learning What this lesson covers - The service-level indicator (SLI) as a measurement taken from real requests - The service-level objective (SLO), its window, and the error budget - The service-level agreement (SLA) and why the objective is set above it - Health checks, and why a check proves only the path it exercises - Running a health check on a schedule from a separate monitoring host - Log aggregation with rsyslog forwarding to one collector Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Monitoring
Descrição da aula 123: SNMP, MIBs, Traps, Webhooks, Thresholds, and Alerts | CompTIA Linux+ XK0-006 (Objective 5.1)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Monitoring data and alerting is part of CompTIA Linux+ XK0-006 objective 5.1, which covers summarizing monitoring concepts and configurations in a Linux system. This lesson explains the Simple Network Management Protocol (SNMP), management information bases (MIBs), traps, and agent and agentless collection, then thresholds, events, alerts, notifications, webhooks, and logging. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:33 SNMP managers and agents 1:04 Management information bases 1:31 SNMP traps 1:55 Agent and agentless collection 2:24 Thresholds, events, alerts, and notifications 2:55 Webhooks and logging 3:26 Practice question 4:05 Answer and recap 4:35 Keep learning What this lesson covers - SNMP managers and agents, UDP port 161, and the difference between versions 1, 2c, and 3 - Object identifiers (OIDs) and the management information bases (MIBs) that name them - SNMP traps on UDP port 162, and why a condition that matters is also polled - The difference between agent-based and agentless collection - How thresholds produce events, alerts, and notifications, and how hysteresis prevents flapping - Webhooks as a notification path, and logging each measurement to build a baseline Covered in depth in Module 21 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SNMP
Descrição da aula 124: Kernel Panic, GRUB Misconfiguration, and Missing Drivers | CompTIA Linux+ XK0-006 (Objective 5.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Boot and kernel failures are part of CompTIA Linux+ XK0-006 objective 5.2, which covers analyzing and troubleshooting hardware, storage, and Linux OS issues. This lesson explains how the last console line names the failed boot stage, then covers a server not turning on, GRUB misconfiguration, kernel panic, kernel corruption issues, and missing or disabled drivers, and the recovery entry points. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Finding the failed boot stage 0:55 GRUB misconfiguration 1:26 Kernel panic 1:58 Kernel corruption issues 2:29 Missing or disabled drivers 3:00 Recovery entry points 3:30 Practice question 4:08 Answer and recap 4:38 Keep learning What this lesson covers - How the last line on the console places a boot failure in one stage - The grub> and grub rescue> prompts, wrong kernel arguments, and regenerating the GRUB configuration - Reading the reason after "Kernel panic - not syncing" and booting the previous kernel - Kernel corruption issues: signature and module format errors, package verification, and reinstalling the kernel - Missing or disabled drivers: lspci -k, blacklist lines in /etc/modprobe.d, and rebuilding the initramfs - Recovery entry points: an older kernel, the rescue and emergency targets, rd.break, and installation media Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #KernelPanic
Descrição da aula 125: Mount Errors, Full Filesystems, Inodes, and Quota Issues | CompTIA Linux+ XK0-006 (Objective 5.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Storage failures are part of CompTIA Linux+ XK0-006 objective 5.2, which covers analyzing and troubleshooting hardware, storage, and Linux OS issues. This lesson explains how the error message identifies the failing layer, then covers a filesystem that will not mount, a full OS filesystem, inode exhaustion, a partition that is not writable, and quota issues. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Error messages and storage layers 0:55 Filesystem will not mount 1:25 Operating system filesystem full 1:56 Inode exhaustion 2:26 Partition not writable 2:57 Quota issues 3:25 Practice question 4:09 Answer and recap 4:40 Keep learning What this lesson covers - The four storage error messages and the layer each one names - A filesystem that will not mount: findmnt --verify, blkid, /etc/fstab, and the nofail option - A full OS filesystem: df -h, du, and deleted files held open, found with lsof +L1 - Inode exhaustion: the same message with free space, confirmed with df -i and du --inodes - A partition that is not writable: a deliberate read-only mount, a kernel remount after errors, and a read-only device - Quota issues: soft and hard limits, the grace period, quota -s, setquota, and edquota Covered in depth in Modules 11, 12, and 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxTroubleshooting
Descrição da aula 126: Segmentation Faults, Killed Processes, and Memory Leaks | CompTIA Linux+ XK0-006 (Objective 5.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting process and application failures is part of CompTIA Linux+ XK0-006 objective 5.2, which covers analyzing and troubleshooting hardware, storage, and Linux OS issues. This lesson explains how the exit status shows the way a process ended, then covers segmentation faults, killed processes, memory leaks, unresponsive processes, PATH misconfiguration issues, and an inaccessible server. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Reading how a process ended 1:00 Segmentation faults 1:28 Killed processes 1:57 Memory leaks 2:26 Unresponsive processes 3:00 PATH misconfiguration and an inaccessible server 3:33 Practice question 4:08 Answer and recap 4:37 Keep learning What this lesson covers - Exit status 126, 127, 137, and 139, and the rule of 128 plus the signal number - Segmentation faults: signal 11 (SIGSEGV), the kernel log line, and core dumps read with coredumpctl - The three senders of SIGKILL: the kernel OOM killer, the systemd stop timeout, and a person or script - Memory leaks: sampling the resident set size (RSS) and containing the leak with MemoryMax= - Unresponsive processes read by state: R, S, D, T, and Z - PATH misconfiguration under cron, sudo, and systemd, and checking an inaccessible server with sshd -t Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Troubleshooting
Descrição da aula 127: systemd Unit Failures and Package Dependency Issues | CompTIA Linux+ XK0-006 (Objective 5.2)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Systemd unit failures and package dependency issues are part of CompTIA Linux+ XK0-006 objective 5.2, which covers analyzing and troubleshooting hardware, storage, and Linux OS issues. This lesson explains how to find, classify, and explain a failed systemd unit with systemctl and journalctl, then how dependency issues appear and are resolved on the RHEL and Debian families. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 The order of work for a failed unit 0:56 Result values 1:27 Exit status values 1:58 Reading the journal and reset-failed 2:26 Dependency issues on the RHEL family 2:56 Dependency issues on the Debian family 3:23 Practice question 4:05 Answer and recap 4:37 Keep learning What this lesson covers - The order of work for a failed unit: systemctl --failed, systemctl status, and journalctl -u - The result values exit-code, signal, timeout, start-limit-hit, and dependency - Exit status values such as 1/FAILURE, 203/EXEC, and 217/USER, and what each one points to - journalctl options that narrow the output, and systemctl reset-failed after the fix - The dnf "nothing provides" message, its common causes, and dnf provides - Unmet dependencies on the Debian family, apt --fix-broken install, and apt-cache policy Covered in depth in Modules 07 and 10 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #systemd
Descrição da aula 128: MTU Mismatch, Bonding, IP Conflicts, and Link Problems | CompTIA Linux+ XK0-006 (Objective 5.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting interface and addressing problems is part of CompTIA Linux+ XK0-006 objective 5.3, which covers analyzing and troubleshooting networking issues on a Linux system. This lesson checks an interface from the wire upward: link down, link negotiation issues, interface misconfiguration with MTU mismatch, bonding, and MAC spoofing, then IP conflicts and dual stack issues. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:25 Link down 0:54 Link negotiation issues 1:22 Interface misconfiguration and MTU mismatch 1:56 Bonding 2:24 MAC spoofing and IP conflicts 2:52 Dual stack issues 3:17 Practice question 4:06 Answer and recap 4:35 Keep learning What this lesson covers - Link down: reading the UP, LOWER_UP, and NO-CARRIER flags in ip -br link, and confirming with ethtool - Link negotiation issues: autonegotiation, duplex mismatch, late collisions, and CRC errors - MTU mismatch: 1,500 and 9,000 byte frames, and testing with ping -M do -s - Bonding: modes, switch requirements, and bond state in /proc/net/bonding/ - MAC spoofing and IP conflicts: port security, the permanent address, and arping - Dual stack issues: testing IPv4 and IPv6 separately with curl -4 and curl -6 Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Networking
Descrição da aula 129: Routing, DNS, DHCP, and Reachability Problems | CompTIA Linux+ XK0-006 (Objective 5.3)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting routing, DNS, DHCP, and reachability problems is part of CompTIA Linux+ XK0-006 objective 5.3, which covers analyzing and troubleshooting networking issues on a Linux system. This lesson explains how each connection error locates a fault on the path, then covers DHCP issues, routing issues, the gateway, DNS issues, and a server that is unreachable or cannot be pinged. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 Reading the connection error 0:59 DHCP issues 1:24 Routing issues 1:52 The gateway 2:20 DNS issues 2:49 Server unreachable and cannot ping server 3:19 Practice question 3:55 Answer and recap 4:21 Keep learning What this lesson covers - The connection errors: Name or service not known, Network is unreachable, No route to host, Connection refused, and a timeout - DHCP issues: a client with no IPv4 address, a capture on UDP ports 67 and 68, the server log, and a rogue server - Routing issues: ip route get, the longest prefix match, the metric, and missing or stale routes - Gateway faults: no default route, a gateway that does not answer, and a second default route - DNS issues: getent hosts compared with dig, NXDOMAIN, a nameserver that does not answer, and stale answers - Server unreachable and cannot ping server: what ping tests, Packet filtered, and testing the service port with nc and ss Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Troubleshooting
Descrição da aula 130: Firewall and Exposed Service Troubleshooting | CompTIA Linux+ XK0-006 (Objectives 5.3 and 5.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting firewall and service exposure problems is part of CompTIA Linux+ XK0-006 objective 5.3, which covers analyzing and troubleshooting networking issues, and objective 5.4, which covers analyzing and troubleshooting security issues. This lesson explains what the client's error says about a failed connection, then covers misconfigured firewalls, exposed or misconfigured services, and remote access issues. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Reading the client's error 0:57 Checks from the service outward 1:28 Misconfigured firewalls 1:58 Exposed or misconfigured services 2:26 Remote access issues 2:55 Preparing a remote change 3:24 Practice question 4:02 Answer and recap 4:31 Keep learning What this lesson covers - The three client errors: Connection refused (a TCP reset), No route to host (an ICMP prohibited message), and a timeout (no reply) - Five checks on the server from the service outward, with systemctl status, ss -tlnp, tcpdump, and the firewall listing - Misconfigured firewalls: runtime-only changes, the wrong zone, rule order, overly broad allows, and rule counters - Exposed or misconfigured services: comparing bind addresses on the host with an nmap scan from another host - Remote access issues: ssh -v, the server journal, AllowUsers, and fail2ban - Preparing a remote change: sshd -t, a scheduled rollback, a second session, and an out-of-band console Covered in depth in Module 16 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Firewall
Descrição da aula 131: Troubleshooting Permissions, ACLs, and SELinux Denials | CompTIA Linux+ XK0-006 (Objective 5.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting permission and SELinux problems is part of CompTIA Linux+ XK0-006 objective 5.4, which covers analyzing and troubleshooting security issues on a Linux system. This lesson explains how the exact error message selects the first check, then covers the path walk, ACLs, file attributes, and the SELinux causes of context, Booleans, and policy. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:28 Start from the exact message 0:56 The path and the identity 1:24 ACLs 1:51 Attributes 2:21 Confirming an SELinux denial 2:48 Matching the cause to the fix 3:21 Practice question 3:59 Answer and recap 4:26 Keep learning What this lesson covers - Permission denied, Operation not permitted, and Read-only file system, and the first check for each - Execute permission on every directory in the path, shown by namei -l, and the group list a session keeps from login - ACL faults: a mask lowered by chmod, a named user entry, and a lost ACL, read with getfacl - The immutable and append-only attributes, shown by lsattr - Confirming an SELinux denial with ausearch -m AVC and sealert - Matching the cause to the fix: restorecon and semanage fcontext, semanage port, setsebool -P, and a reviewed audit2allow module Covered in depth in Modules 06 and 17 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #SELinux
Descrição da aula 132: SSH, Certificate, Cipher, and Repository Failures | CompTIA Linux+ XK0-006 (Objective 5.4)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting security failures is part of CompTIA Linux+ XK0-006 objective 5.4, which covers analyzing and troubleshooting security issues on a Linux system. This lesson explains how the error message identifies the layer, then covers remote access issues, certificate issues, cipher negotiation, obsolete protocols and ciphers, unpatched vulnerable systems, and a misconfigured package repository. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:30 Remote access issues 1:00 Certificate issues 1:30 Cipher negotiation issues 1:59 Obsolete protocols and ciphers 2:27 Unpatched vulnerable systems 3:01 Misconfigured package repository 3:33 Practice question 4:11 Answer and recap 4:41 Keep learning What this lesson covers - Remote access issues: Connection refused, Connection timed out, ssh -v on the client, and sshd -T on the server - Certificate issues read with openssl s_client: a missing intermediate, an expired certificate, and a hostname mismatch - Cipher negotiation issues in SSH and TLS, and the log line that lists the offer from the client - Obsolete or insecure protocols and ciphers, and the system-wide crypto policy on RHEL 9 - Unpatched vulnerable systems: pending security updates and updates that still need a reboot - A misconfigured package repository: an unreachable repository, gpgcheck=0, and the signing key Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #LinuxSecurity
Descrição da aula 133: CPU, Memory, and Load Troubleshooting | CompTIA Linux+ XK0-006 (Objective 5.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting CPU, memory, and load problems is part of CompTIA Linux+ XK0-006 objective 5.5, which covers analyzing and troubleshooting performance issues. This lesson explains what the load average counts, then covers high CPU usage, high context switching, swapping, out of memory conditions, and the baseline that each reading is compared with. It closes with an exam-style practice question. Chapters 0:00 Introduction 0:29 What the load average counts 1:01 Processor time and the run queue 1:30 High context switching 1:58 Memory pressure 2:26 User reports and baselines 2:51 Failed log-ins and slow startup 3:18 Practice question 4:02 Answer and recap 4:30 Keep learning What this lesson covers - High load average and blocked processes: runnable (R) and uninterruptible (D) states, counted with ps - High CPU usage and the CPU bottleneck: the sar -u columns %user, %system, and %steal, with pidstat and renice - High context switching: the cs column of vmstat, sar -w, and oversized thread pools - Swapping and out of memory: thrashing, the si and so columns, sar -W, and the OOM killer - System unresponsiveness, sluggish terminal behavior, and exceeding baselines with the sysstat record - High failed log-in attempts with lastb, and slow startup with systemd-analyze blame Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Performance
Descrição da aula 134: Disk and Network Performance Troubleshooting | CompTIA Linux+ XK0-006 (Objective 5.5)
Studying for Linux+? Get the complete Linux+ XK0-006 course, with a full textbook, narrated lectures, hands-on labs, and practice quizzes, at Morse Group Institute of Technology: https://mgit.io Troubleshooting disk and network performance is part of CompTIA Linux+ XK0-006 objective 5.5, which covers analyzing and troubleshooting performance issues. This lesson explains how to divide a slow response into stages, then covers high I/O wait time, disk latency, hardware errors, slow remote storage, low throughput, packet drops, random disconnects and timeouts, high latency, and jitter. It closes with an exam-style practice question and completes the series. Chapters 0:00 Introduction 0:26 Dividing the response time 0:54 I/O wait and disk latency 1:21 Hardware errors and remote storage 1:57 Low throughput 2:25 Drops, disconnects, and timeouts 2:56 High latency and jitter 3:23 Practice question 4:05 Answer and recap 4:32 Keep learning What this lesson covers - Slow response times and slow application response: measuring each stage against its baseline, with curl -w and a request against localhost - High I/O wait time and high disk latency: the wa column of vmstat, the await columns of iostat -x, and pidstat -d - Hardware errors and slow remote storage response: the kernel log, raw disk sector counts, nfsiostat, and nfsstat -rc - Low throughput: measuring the disk ceiling with a direct dd write and the network ceiling with iperf3 - Packet drops, random disconnects, and random timeouts: interface counters, link state messages, and a full connection tracking table - High latency and jitter: ping round-trip time and the per-hop report of mtr Covered in depth in Module 22 of the full course at https://mgit.io Train with MGIT Morse Group Institute of Technology offers CompTIA certification training in A+, Network+, Security+, and more, plus corporate IT training and a high school STEM prep academy. Sign up at https://mgit.io Instructor: Dr. Merrill Perkins, D.Sc. Cybersecurity, MGIT CompTIA and Linux+ are trademarks of CompTIA, Inc. This video is an independent study resource and is not endorsed by CompTIA. #LinuxPlus #CompTIA #Linux #Performance
Sobre o Canal
Morse Group Institute of Technology
Morse Group Institute of Technology (MGIT) teaches the IT and cybersecurity skills behind the CompTIA certifications. This channel posts short lessons on core exam concepts, taught by Dr. Merrill Perkins, D.Sc. Cybersecurity. For the complete courses, with full textbooks, narrated lectures, hands-on labs, and practice quizzes for A+, Network+, Security+, and more, sign up at https://mgit.io MGIT also offers corporate IT training and a high school STEM prep academy. CompTIA, A+, Network+, and Security+ are trademarks of CompTIA, Inc. MGIT is not endorsed by CompTIA.
GRATUITO
Cursos relacionados
Prévia do curso
